Email This Page to a Friend
Date:
October 15, 2009 07:00 PM
Author:
Eric G
Subject: Testronics 504 AOI
I started a new company that has a Testronics 504 AOI machine. No one knows how to program it, and they can't find the manual. So far I have been able to load a centroid file, and set the board size. However, when i load everything, all my parts are located off the board and i have to manually align them. Once i get that done, i add the parts to the library, but i am unable to change to roi inspection size for each part. So right now, it just looking for a very small area on each component and not the whole component. What am i doing wrong, or not doing? any input will be helpful
Thanks
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60124)
Date:
October 21, 2009 12:18 PM
Author:
CL
Subject: Testronics 504 AOI
Eric,
Here is the link for Testronics support. They should be able to get you a manual.
info@testronics.com
Chris
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60156)
