Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Mydata TP11 UFP hardware initiation failure

Mydata TP11 UFP hardware initiation failure

Subscribe to Thread

I have a TP11 UFP without the hydra option and have had diff... - Jul 20, 2006 by Ev

Ev, This error could be caused by any number of problems.... - Jul 20, 2006 by Paul M.

Paul, the error says "MOT1-38-247 MSETDYNX: Xwagon fan no... - Jul 20, 2006 by Ev

Ev, That's a new one for me. Sorry, can't be of help on t... - Jul 20, 2006 by Paul M.

How does the machine sense that the fan is working/not worki... - Jul 26, 2006 by

My focus has moved to the X motor itself. The one common fac... - Jul 26, 2006 by Ev

Have you considered calling Mydata tech support ? ... - Jul 27, 2006 by Sr. Tech

Yes .... I have spoken with Mydata tech support several time... - Jul 31, 2006 by Ev

#42820

Mydata TP11 UFP hardware initiation failure | 20 July, 2006

I have a TP11 UFP without the hydra option and have had difficulty keeping it running. The latest problem is a hardware iniation problem which in the past was a PAIB board failure which I replaced about one year ago almost to the day. Has anyone seen this as a common failure on these machines? I would welcome any sugestions on keeping this thing going consistently.

reply »

Paul M.

#42831

Mydata TP11 UFP hardware initiation failure | 20 July, 2006

Ev,

This error could be caused by any number of problems.

Is there an error message in the message window before hardware initiation error? If so, what is it? A failure in any axis (x,y,z,c,theta,y-wagon,tray-wagon) could cause your symptom.

Paul M.

reply »

#42833

Mydata TP11 UFP hardware initiation failure | 20 July, 2006

Paul,

the error says "MOT1-38-247 MSETDYNX: Xwagon fan not working." I have checked...the X motor fan and it is working...the fan behind the PAIB board is also working...I checked this because there is a connector marked X wagon fan on the PAIB board that is connected to a fan and this fan is working. I have swapped the MOT cards around ....to no avail. I am obviously missing something

Ev.

reply »

Paul M.

#42835

Mydata TP11 UFP hardware initiation failure | 20 July, 2006

Ev,

That's a new one for me. Sorry, can't be of help on that problem. Good luck and keep us informed.

Paul M.

reply »

RLM

#42964

Mydata TP11 UFP hardware initiation failure | 26 July, 2006

How does the machine sense that the fan is working/not working? The fan may be operational but the sense mechanism may be at fault.

reply »

#42966

Mydata TP11 UFP hardware initiation failure | 26 July, 2006

My focus has moved to the X motor itself. The one common factor in this paricular problem has been the time of year. The day was a particularly hot day with high humidity. Even though there is a "Xfan" connection on the PIAB board I do not believe this fan to be the culprit. There is another input to the PIAB board directly from the X motor called a temp sw and a brake i/p. I believe this temp sw is the culprit because it sees an overtemp situation and shuts the X motor down. Naturally since the weather in the last few days has been cooler, the machine initiates fine. I also put the original PIAB board back in the machine and it continues to initiate the way it should. I have vacuumed and cleared away any accumulated dust from the area around the motor and I have removed the cover off the motor enclosure as well as off the motor itself. I'll keep you posted. Thanks for your interest.

Ev.

reply »

Sr. Tech

#42977

Mydata TP11 UFP hardware initiation failure | 27 July, 2006

Have you considered calling Mydata tech support ?

reply »