Conformal coating of smt boards

Doug

Please take a look at my web site: http://www.concoat.co.uk

If you want selective robotic type systems then talk with Precision Valve (PVA) or Nordson but be prepared to part with >$100K for a full in-line.

We can do conventional spray at 30 to 50% less but you must mask components you don't want to coat. If they are on 1 end only of the board, then dip coat which is the least expensive option starting at around $12K for up to 100 assemblies per hour.

Hope this helps

Regards Graham Naisbitt

reply »