Electronics Forum | Thu Feb 21 04:41:37 EST 2008 | mun4o
hi,Toni, we use only FR4.Some of PCB we order in China and Taiwan.With these PCBs we can't any problem.Other PCB we order here in Bulgaria.The problems with voids start last year - we have voids only in PCBs from Bulgarian factory.The process is sam
Electronics Forum | Wed Jun 12 14:42:40 EDT 2013 | armandogomez
Hello guys ! I am here again with a problem, right now we have a problem with a new product, the problems are with voids with the PTH we put a receptacle with terminal blades that are 1.3mm width in a pth with a diameter of 1.5mm we use a pallet to
Electronics Forum | Thu Jun 28 17:05:46 EDT 2012 | davef
Here’s what we seem to know: * There’s a problem with voiding in the solder connections of SMT capacitors * A void is an open area caused by air or process fluid that is trapped within a solder connection * Voids are an allowable condition as long as
Electronics Forum | Tue Jun 26 15:40:12 EDT 2012 | ssupertuba
Hello there, I'm presently experiencing some blow holes and solder voids in the solder fillet of caps on boards. They are ceramic caps. The solder is SAC105 and the parts range from 33pf to 0.1uf ceramic. Any suggestions?
Electronics Forum | Thu Apr 01 10:05:32 EDT 2010 | brandenspencer10
Hi, My name is Branden Spencer and I am a jr. engineer at TTM technologies. We are currently having and issue with our wave solder process. We are getting what looks like either solder dross or voiding in our solder joints (through hole and SMT). We
Electronics Forum | Wed Jun 27 21:56:31 EDT 2012 | davef
I'm spinning on this. Are we talking PTH or SMT?
Electronics Forum | Thu Apr 01 14:43:26 EDT 2010 | cbart
You say its in both smt and through hole, but, are you waving the SMT parts as well, I assume yes since you think its dross in the joints. Questions: 1- do you have higher mag scopes that you can zoom in a little more to see if these are voids or dr
Electronics Forum | Thu Jun 28 09:43:25 EDT 2012 | ssupertuba
I'm sorry. These are SMT caps such as a C0805C271J1GAC. Small 0805 caps. I know they gennerally give you solder balls that sit on the side of those parts but they wash off.
Electronics Forum | Thu Jun 28 22:20:23 EDT 2012 | davef
John: Secure the capacitors that you removed from the machine ... * Removed capacitors have a problem * New replacement capacitors don't have a problem Find help to determine the difference between the two reels of parts
Electronics Forum | Thu Jun 28 09:57:50 EDT 2012 | mosborne1
blow holes and via holes are almost always caused by moisture and in PTH they could be moisture and improper drilled holes. If you are seeing solder balls next to the parts than I would say you have a reflow profile problem. Are you using any kind of