New Equipment | Cleaning Agents
AQUANOX® A8830 is a mild formulation that does not damage stencils and is highly effective at removing all types of solder pastes (water soluble, rosin, and no-clean) from fine pitch apertures. AQUANOX A8830 is a low odor cleaner that can be used
Technical Library | 2021-04-21 19:28:30.0
Voids affect the thermal characteristics and mechanical properties of a solder joint, thereby affecting the reliability of the solder interconnect. The automotive sector in particular is requiring the mitigation of solder voids in various electronic control modules to the minimum possible level. Earlier research efforts performed to decrease voids involved varying the reflow profile, paste deposit, paste alloy composition, stencil aperture, and thickness.
Industry News | 2012-04-09 13:45:59.0
As the electronics assembly industry evolves, printed circuit board (PCB) features and surface mount technology (SMT) components continue to get smaller and smaller. This miniaturization shrinks the process window at print, placement, and reflow, increasing the opportunities for defects.
Industry Directory | Manufacturer
Manufacturer of Laser Cut & Chemical Etched Stencils.
New Equipment | Solder Paste Stencils
ALPHA® Stencil products are based on unique blends of advanced technology, the experience gained from having made over half a million solder paste stencils, the specialist knowledge that could only be accumulated by a company privileged to produce bo
This is video shows how to print a PCB using a prototype foil only stencil. The SMT prototype stencil (www.soldertools.net) is made from a high nickel content material able to offer repeatable high precision apertures. The steps of alignment, printin
Technical Library | 2022-08-17 01:21:54.0
Back in the "good old days," stencil cleaning was effortless and effective. CFC-based solvents were sprayed or wiped onto a stencil with apertures hundreds of times larger than modern-day components. The stencil cleaning process was not considered a value-added procedure; instead it was the cleaning of a production tool. How times have changed. The late-1980s ushered in the end of most of the popular solvents, and the machines that consumed them. Assemblers turned to alternative cleaning agents, including IPAs and other solvents.
New Equipment | Solder Paste Stencils
Stentech is at the forefront of the next generation of stencils, Electroformed Stencils, with more than ten years of research and development. Stentech has now been manufacturing quality Electroformed Stencils for over five years for our North Americ
SMT Prototype Stencils are laser cut solder paste prototype stencils designed to work on their own for hand printing. These laser cut prototype stencils do not need to be permanently glued in a frame. These so-called framelessstencils are less expens
Technical Library | 2023-08-04 15:27:30.0
A designed experiment evaluated the influence of several variables on appearance and strength of Pb-free solder joints. Components, with leads finished with nickel-palladium-gold (NiPdAu), were used from Texas Instruments (TI) and two other integrated circuit suppliers. Pb-free solder paste used was tin-silver-copper (SnAgCu) alloy. Variables were printed wiring board (PWB) pad size/stencil aperture (the pad finish was consistent; electrolysis Ni/immersion Au), reflow atmosphere, reflow temperature, Pd thickness in the NiPdAu finish, and thermal aging. Height of solder wetting to component lead sides was measured for both ceramic plate and PWB soldering. A third response was solder joint strength; a "lead pull" test determined the maximum force needed to pull the component lead from the PWB. This paper presents a statistical analysis of the designed experiment. Reflow atmosphere and pad size/stencil aperture have the greatest contribution to the height of lead side wetting. Reflow temperature, palladium thickness, and preconditioning had very little impact on side-wetting height. For lead pull, variance in the data was relatively small and the factors tested had little impact.
.gif)
