Electronics Forum | Fri Sep 07 14:09:57 EDT 2001 | aqueous
Hi Carol, Pressure requirements have changed over the past few years. In the recent past, aqueous cleaning systems relied on high flow, low pressure �flooding� techniques. 20 � 30 PSI pumped through large orifice nozzles. With ever increasing boa
Electronics Forum | Wed May 15 13:11:26 EDT 2002 | fmonette
Hi Dason, Yes I was talking about the same paper. This is the best technical information available to clearly explain the physics of moisture diffusion inside a plastic package. Many of the guidelines contained in the current J-STD-033 are derived
Electronics Forum | Tue Jul 02 12:10:06 EDT 2002 | fmonette
Dason, Just a word of caution about your experiment. Evaluating moisture content by weight gain is a very simplistic model, based on the assumption that the moisture content is uniform across the package. In fact, recent technical papers have cl
Electronics Forum | Tue Jul 16 21:53:51 EDT 2002 | davef
We don't use Sn43Pb43Bi14 solder. We don't make high performance circuit boards that are subjected to temperatures from -55� Celsius to +85� Celsius and vibration requirments at 6g. We don't like bismuth solder alloys, because: * Fatigue life is r
Electronics Forum | Fri Dec 08 02:40:45 EST 2006 | Mike Konrad
Hi 'K', We manufacture both batch and inline defluxing equipment so we have no axe to grind with either technology. There are pros and cons associated with both technologies under specific conditions. Batch machines are typically good cleaners but
Electronics Forum | Tue Aug 07 19:32:40 EDT 2007 | davef
Zinc from the brass diffuses into the solder and reacts with tin causing dezincification. Dezincification is a specific type of de-alloying, or selective, leaching corrosion of brass fittings. This type of corrosion selectively removes zinc from th
Electronics Forum | Mon Feb 25 11:12:32 EST 2008 | hegemon
It sounds more as though you have a profiling problem primarily, however, if your placement is not square to the board, then you should get your machine setup correct first. After that you can get to the profiling. If the BGA is brought up to tempe
Electronics Forum | Thu Nov 10 10:45:32 EST 2011 | aqueous
The use of IPA in automated defluxing systems is nearly extinct for the following reasons: 1. IPA is flammable. In a spray-in-air environment, the already low flashpoint is even lower. 2. IPA is not a great solvent. There are specific containme
Electronics Forum | Thu Mar 28 20:57:22 EDT 2013 | ericrr
I have my cell phone wired up for "RSS feeds". Yesterday at work, I saw on my cell phone someone ask "KE750 & KE760 cannot recognation part standing" (spelling mistake uncorrected) I am not sure if this answer is correct as I can not find the thread
Electronics Forum | Tue Jul 16 13:08:24 EDT 2013 | ericrr
I seem to of slipped into a mighty giant suction cup, and every day is the same. Now take yesterday as I was making a sample the start of run board, we have run many times. it got halfway placing diffused LED's 3216 (about 1207 size) then is stoppe
