Electronics Forum | Wed Aug 24 10:04:48 EDT 2005 | davef
Try; * CS Hyde; 1351 N Milwaukee Ave, Lake Villa, IL 60046; 800-461-4161 / 847-395-0325 Fax: 800-441-8063 / 847-395-0535 * CGS Tape, 12-270 Timberbank Blvd, Toronto, ONT M1W 2M1, CA; 416-561-9168 Fax 416-773-0262 http://www.cgstape.com
Electronics Forum | Mon Sep 12 14:38:56 EDT 2005 | patrickbruneel
Amol, Your problem is already very isolated only one part has the problem (the part that is hand soldered) Manual cleaning is very difficult. Why are you not considering a no-clean cored solder to solder the one part and skip the manual cleaning. Do
Electronics Forum | Fri Oct 07 09:05:12 EDT 2005 | chunks
There's a ton of em'. We used the one from Paul N. Gardner Company, part # WF-CCD. They cost 0.95 each, so if someone decides the gage looks better in their garage, it's not that big of a deal. We set up a program that puts down 4 stokes on a test
Electronics Forum | Fri Nov 04 11:18:34 EST 2005 | patrickbruneel
I agree with Dave 100%, ATC will expose the board and components weaknesses and potential design problems and/or the need for conformal coating. The life span can only be predicted and/or extended by well-documented field failure analyses history and
Electronics Forum | Sun Mar 12 11:55:52 EST 2006 | ravi
Hi Amol, I am ravi from Autron India PVt Ltd, we are business partner with PVA, i would like to know your company address & ur e-mail ID , so that we can start communication officially. My e-mail Id --ravi@autroncorp.com. With Best Regards Ravi
Electronics Forum | Tue Mar 06 07:18:26 EST 2007 | Rob Cass
I actually bought this tape directly from a disrupter of Saint-Gobain series M797. It was placed on 6" x 9" sheets to have unique conformal coating masking cut outs made. Took some effort to get the process worked out but all is well now.
Electronics Forum | Fri Mar 02 16:12:45 EST 2007 | peter
We are in the early stages of converting al of our customers to No-Clean solder. I expect some customers to have no objections, others I am sure will be concerned about the "residue." I know that chemistries have improved greatly and if the process i
Electronics Forum | Mon Jul 23 16:21:54 EDT 2007 | mleber
We have used many ways of measuring but all are either messy, inconsistent or time consuming. We have done wet, glass slide dry, etc. We are currently using a kapton tape dot system. Spray the board, remove the dot and measure it, subtract the thick
Electronics Forum | Thu Jan 22 09:04:22 EST 2009 | mefloump
Humiseal recommends a 1 to 1 mix ratio of 1B31 and Thinner 521. I have for that I need to thin my ratio more to get humiseal to spray correctly in our PVA650. Also I am using Humiseal 1B73 but the tech data sheets say the same for spraying. Try thinn
Electronics Forum | Thu Jan 22 03:25:26 EST 2009 | stevewilde
What masking tape can people recommend for masking the board when conformal coating. I am using a PVA autocoat machine and humiseal 1B31. Current tape, is leaving residue on board when used to hold link wires down whilst glue cures and also when used
Lewis and Clark is your #1 Pre-Owned Surface Mount and In-Circuit Test equipment supplier. We offer a variety of equipment solutions at a significant cost savings over new.
Manufacturer / Equipment Dealer / Broker / Auctions
18 Celina Ave., Unit 16
Nashua, NH USA
Phone: (603) 594-4229