Electronics Forum | Sat Mar 08 11:04:47 EST 2003 | Joe
Mark, You've already received some good advice from the other posters. The one thing I would add is that even if you solve your printing issues on this type of part, the relative small quantity of paste may be prone to soldering problems. Ever s
Electronics Forum | Wed Sep 22 21:23:03 EDT 1999 | se
| | I've had some trouble pasting a test board for a MicroBGA trial. Most of the paste remains in the stencil apertures. | | The stencil is 6 mil thick, laser cut and electo-polished. | | The apertures are 12 mil in diameter with 20 mil pitch. | | We
Electronics Forum | Thu Sep 23 12:47:48 EDT 1999 | Earl Moon
| | | I've had some trouble pasting a test board for a MicroBGA trial. Most of the paste remains in the stencil apertures. | | | The stencil is 6 mil thick, laser cut and electo-polished. | | | The apertures are 12 mil in diameter with 20 mil pitch.
Electronics Forum | Sat Mar 18 02:21:31 EST 2006 | pavel_murtishev
Good morning, Once again a met annoying solder beading issue while producing board with PLL (leadless, contacts from the bottom side of the package). Board has very high placement density and beads appear near PLL package only. This package is finep
Electronics Forum | Tue Mar 28 08:29:04 EST 2006 | davef
Pad design - Standard IPC 20 pitch QFP Thermal pad design - Layout the thermal pad 0mm to 0.15mm larger per side (0mm to 0.30mm larger overall) than the exposed die pad on the package. �Larger than�, as opposed to the same size, is preferred. Obvio
Electronics Forum | Wed Nov 18 18:10:16 EST 1998 | fraser
| | | | | | I keep hearing about polyimide stencils, but what are they like in terms of registration and aperture accuracy? | | | | | | | | | | | Fraser- | | | | | | | | | | We use polyimide stencils with great success for our prototype boards.
Electronics Forum | Tue Sep 29 21:39:07 EDT 2020 | kylehunter
Hi, We are currently working on a board that has 3x 50-pin THT at 1.27mm pitch each. This is too small for us to be able to consistently do on our selective solder. We are instead considering pin in paste. The connector we are using can be spec'd at
Electronics Forum | Sat May 12 00:04:36 EDT 2001 | zam_bri
The product I'm running currently consist a mix of 20 mil pitch QFP, 50 mil pitch, 0402, BGA and variable size of connectors from small to big, on OSP finished PCB. Running intrusive reflow with a mix packages is a real headache, esplly when you hav
Electronics Forum | Mon Aug 17 02:50:44 EDT 1998 | Bob Willis
| Have an SRT w/preheat, 18 layer board all copper, 456 BGA needs to be removed and replaced. The manufacturer is Chip Express and during reflow it warps up or down. Causing either opens or shorts on the corners. I was using gel flux with multiple
Electronics Forum | Mon Nov 16 12:41:46 EST 1998 | MMurphy
| | | | | I keep hearing about polyimide stencils, but what are they like in terms of registration and aperture accuracy? | | | | | | | | | Fraser- | | | | | | | | We use polyimide stencils with great success for our prototype boards. They are
