Electronics Forum | Mon May 13 07:17:58 EDT 2019 | rajsharma
Automation is the technology by which a process or procedure is performed with minimal human assistance.[1] Automation [2] or automatic control is the use of various control systems for operating equipment such as machinery, processes in factories, b
Electronics Forum | Thu Aug 15 11:27:20 EDT 2019 | slthomas
Please pardon the poor images - it's difficult to focus and stabilize a phone cam through an eyepiece at 40X. Images 72620 and 72733 are of the same part from opposite sides. 73558 is the only one so far that I've seen crack propagation into the te
Electronics Forum | Fri Feb 27 10:54:38 EST 1998 | Earl Moon
REVISITING MULTILAYER DIMENSIONAL STABILITY AND LAMINATE INTEGRITY It has been said we must learn it all over again and again about every four years. I know Lee Ritchey said that to me about high speed digital circuit design. The same seems true for
Electronics Forum | Wed Apr 19 18:02:34 EDT 2000 | Mike Flori
If you can divide your boards into different categories it allows you to determine a different starting profile for each category, based on size, # of layers, etc. When you get a new board to profile you'll have an idea what settings will get you clo
Electronics Forum | Tue Aug 22 16:13:08 EDT 2000 | Dr. Ning-Cheng Lee
FR-4 will be OK for small products such as cellular phones. Here the temperature gradient across the board may be 3-4C only, and the board temperature can be well controlled. At temperature above around 245C, the discoloration and delamination may be
Electronics Forum | Thu Jan 27 20:36:13 EST 2000 | Dave F
HJ: Your best chance of running your boards with a single profile is with ovens from the established suppliers (ie, BTU, Conceptronics, Heller, Vitronics, etc). They are experienced in robust control system designs. Stepping aside from that, consi
Electronics Forum | Wed Jan 05 14:21:27 EST 2000 | Glenn Burson
I have the opportunity to pick up a used 1998 Heller 1900WN reflow. I have no experience working with Heller reflows, nor have I heard much about them, so I don't know if they are good quality machines or not. I have concerns about issues such as z
Electronics Forum | Mon Dec 20 07:58:02 EST 1999 | pascal MATHIEU
hello guys ; we are using a fine pitch component(0.65mm) on a thick copper PCB (Cu = 90�m) ; in this case we notice that we are in the process'limits , because the different supplier of the PCB are not able to ensure a good stability of it's process
Electronics Forum | Thu Nov 11 18:28:10 EST 1999 | John Thorup
Hi Jeff Actually it's not necessarily Signal to Noise Ratio or even RF circuitry. All no cleans leave behind residue by description. This residue can affect RF or other high frequency circuits in a number of different ways including SNR. Very high
Electronics Forum | Fri Apr 16 13:15:17 EDT 1999 | Justin Medernach
| Hi, | I just cheesed my previous attempt at this. I looked through IPC 600 and couldn't find anything relating to dimensional stability of a board with regard to stretch. I found bow and twist but nothing on size. I have a PCB that is .030" over
