Lite Fast 2081, a UV encapsulant, was specifically developed to relieve the stress placed on toroidal coils or electronic components that will experience pressure during the molding process. With a durometer Shore D hardness of 5, the UV encapsulant
New Equipment | Cleaning Equipment
SOLVENT IONIC REGENERATION Increases bath life by removing flux as well as particulate contamination from the wash solution. This provides on average a 300% to 1000% increase in bath life and reduces solvent waste. Ionic regeneration also increases
New Equipment | Cleaning Equipment
Zero Ion Ionic Contamination Tester Today's Zero Ion is designed to meet the cleanliness testing challenges associated with modern circuit assemblies. The Zero Ion is capable of extracting and quantifying assembly contamination levels per IPC J STD0
Industry Directory | Distributor / Manufacturer / Manufacturer's Representative
North American Distributor for GEN3 Systems Ltd.test equipment and reliability products, and Inspectis HD Camera inspection tools.
Super powerful expanding desiccant to keep boards & microelectronics moisture free.... Much different than Silica Sand Beads. Also supplier of corrosion prevention treatments that are alternatives to Conformal coatings.
Commonly referred to "Cleanliness Testing" as this test method has, for over 40 years, been acknowledged as an important Quality Assurance and Process Control tool in the manufacture of electronic circuit boards, components and assemblies. The Conta
For heat dissipation Conventional methods measure an adhesive's bulk conductivity, in watts/m-°K. However, across a thin bondline, the resistance of the adhesive itself is only a fraction of the total resistance. Interfacial resistance is a signifi
New Equipment | Cleaning Equipment
SMT Ionic Contamination Tester CTM-100 Test Method Static Sensitivity 0.001uS/cm Tank Size(mm) 380 x 300x 50 Weight （Kg） 42 Product description: SMT Ionic Contamination Tester CTM-100, Test Method Static, Sensitivity 0.001uS/cm, Tank Size(mm)
New Equipment | Test Equipment
SMT Ionic Contamination Tester CTM-100 Test Method Static Sensitivity 0.001uS/cm Tank Size(mm) 380 x 300x 50 Weight （Kg） 42 Product description: SMT Ionic Contamination Tester CTM-100, Test Method Static, Sensitivity 0.001uS/cm, Tank Size(mm)
Technical Library | 2016-09-08 16:27:49.0
In this investigation a test matrix was completed utilizing 900 electrodes (small circuit board with parallel copper traces on FR-4 with LPI soldermask at 6, 10 and 50 mil spacing): 12 ionic contaminants were applied in five concentrations to three different spaced electrodes with five replicas each (three different bare copper trace spacing / five replications of each with five levels of ionic concentration). The investigation was to assess the electrical response under controlled heat and humidity conditions of the known applied contamination to electrodes, using the IPC SIR (surface insulation resistance) J-STD 001 limits and determine at what level of contamination and spacing the ionic / organic residue has a failing effect on SIR.
