Electronics Forum | Tue Nov 24 05:23:18 EST 2009 | prodivegsr
Hi Davef, Thanks...Saw 1 of your thread that you posted : Thanks for providing... From davef : There are many possibilities: * Conformal coat is incompatible with surface residue on the board * Conformal coat is incompatible with solder mask on the
Electronics Forum | Wed Dec 02 10:14:42 EST 2009 | duso02
As a large coating house we use 1B73 daily and we have very few issues with bubbles. We very rarely bake it as the air cure is so short. Also, we only use thinner 73 vice 521. Another question would be; how is it being applied? How thick are you appl
Electronics Forum | Thu Feb 25 07:37:42 EST 2010 | pcbrown
We are using Humiseal 1B31 and polyester dots for masking. We are spraying this in a Binks sprayer mixed at almost 1:1 with 521 thinner. Whe are seeing the coating creating thin halos around the poly dots as if the dots are "rejecting" the coating. T
Electronics Forum | Wed Dec 02 20:11:37 EST 2009 | prodivegsr
Hi Lou, we are using a fluid dispensing machine. our current requirement is around 50um. From the Datasheet,the thinner 73 has a higher evaporation rate of 1.0 comapring with thinner 521 at 0.6... does the higher evaporation rate eliminate the bu
Electronics Forum | Tue Aug 14 16:18:48 EDT 2018 | dontfeedphils
A couple of things to try as I just went through this myself. Checkout this link for pointers on plasma cleaning... http://www.nordson.com/~/media/Files/Nordson/march/Papers/The-Effects-of-Plasma-Treatment-Prior-to-Conformal-Coating-NordsonMARCH.p
Electronics Forum | Thu Aug 01 10:09:31 EDT 2002 | sueph
Dave, I would have never thought of the sheet metal box. My west coast contact, who has dealt with this type of board before, told me yesterday to go ahead and try it at this profile anyway, as the metal plating holds more heat. I was pleasantly
Electronics Forum | Mon Jul 23 17:49:04 EDT 2007 | davef
We know nothing of DeFelsko, but do understand how they distinguish between the solder mask and the conformal coat. DeFelsko manufactures hand-held, non-destructive coating thickness gages that are ideal for measuring the dry film thickness of confo
Electronics Forum | Mon Jul 23 16:15:55 EDT 2007 | davef
Josh: Do you measure the thickness of the coupon prior to coating or do you peal the coating and measure that?
Electronics Forum | Mon Jul 23 09:43:50 EDT 2007 | pjc
From NASA document: Conformal coating thickness shall be determined using a wet film thickness gauge,....... Wet Thickness Gauges can be obtained: Wet film Thickness Gauge P/N 790010 Nordson Corp, Amherst, OH or http://www.nordson.com/cgi-bin/MsmG
Electronics Forum | Wed May 09 04:17:49 EDT 2012 | umar
HI SMT Forum, Right now I am looking for the equipment to measure of my coating thickness that apply to the PCBA process. my chemical type is use acrylic and polyurethane type. If any one of the forum knowing about that, I would like to have on you
