Electronics Forum | Wed Apr 14 20:39:02 EDT 1999 | Dave F
| I need to cure conformal coat on a 19" x 15" board. The material needs 7 - 10 minutes at 100deg C, but I have limited floorspace so I'm looking for an oven with about 36 inches heated length and 18 or more inch wide belt. The material we are consid
Electronics Forum | Sun Nov 10 09:58:38 EST 2013 | kumuda
We have been using a circuit board in the assembly of HV Tank used in X-ray generator. This board acts as a sealant to the oil tank opening. The top side area of the board which comes in contact with oil is conformal coated to avoid oil leak. However
Electronics Forum | Mon Feb 02 16:45:05 EST 2009 | alexander_jw
Looking for a clear conformal coating that can protect a PCB outdoors in Southern CA. Board is 24" x .25" x .03125. Require product to withstand some flexing during installation because of its very thin profile. Must hold up to environment for 10yrs+
Electronics Forum | Mon Feb 02 17:52:19 EST 2009 | davef
Services, Conformal coating contractor: * Advanced Coating; 10723 Edison Ct, Rancho Cucamonga, CA 91730; 800-722-1444 F909-481-1427 info@advancedcoating.com advancedcoating.com * C-C Technologies Inc; 761 Blossom Hill Ln, Dallastown, PA 17313; 717-57
Electronics Forum | Fri Jul 10 14:29:58 EDT 2020 | SMTA-64315913
Can you share some information relative to these questions about your conformal coating process: 1) What process controls do you use for conformal coating? 2) Do you perform manual conformal coating inspection? 3) Do you use AOI for inspecting confor
Electronics Forum | Mon Aug 29 16:21:20 EDT 2011 | rjlasko
Greetings...I have a customer that has an assembly that is conformal coated with Humiseal 1A33. This assembly has some components (resistors and FET's) that heated up during operation and has discolored the conformal coating around their location.
Electronics Forum | Thu Aug 01 12:58:07 EDT 2019 | davef
Look at: * Conformal Coating 101 - https://www.smta.org/chapters/files/UpperMidwest_BTW_Conformal_Coating_June_27th_2012.pdf * IPC Conformal Coating Course - https://edge.ipc.org/course/conformal-coating * IPC-CC-830: Qualification and Performance
Electronics Forum | Thu Nov 21 11:19:58 EST 2013 | davef
Generally, solder connections and leads are conformal coated, unless there is a reason not to coat them.
Electronics Forum | Mon May 13 20:55:25 EDT 2024 | swilson
Can conformal coating be done to PCBs prior to burn in (Hass)? Will it affect the coating?
Electronics Forum | Mon Jan 13 11:14:41 EST 2020 | amitshir9
Conformal coating is a protective polymer film or chemical coating that seals off the vulnerable circuits. I've used the conformal coating flexible PCB from Capel Technology Co.Ltd and there are many types of circuit board produced used by conformal
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, CA USA
Phone: 18002796835