Electronics Forum | Fri Feb 20 17:04:26 EST 2004 | Long
Hi I am looking for some type of peelable mask or plug to cover the connector during the conformal coating. The problem we have is the moisture get into system and eventually penetrate under the connector creating short circuit to the board. What I r
Electronics Forum | Fri Feb 20 18:18:37 EST 2004 | davef
Pls email yer pix
Electronics Forum | Thu Sep 08 17:31:09 EDT 2005 | davef
Urethane CC have greater resistance to solvents than acrylic CC
Electronics Forum | Thu Sep 08 18:41:17 EDT 2005 | bhu
Try parylene. http://www.vp-scientific.com/parylene_properties.htm
Electronics Forum | Fri Sep 09 07:39:40 EDT 2005 | Slaine
we use humiseal for military a customer, in an aerosol can, gives good results
Electronics Forum | Fri Feb 18 08:08:55 EST 2011 | floydf
I have found that depressurizing the tanks when the machine is not in use reduces bubbles.
Electronics Forum | Sat Jan 06 22:09:53 EST 2001 | Greenman
Cory, I've got a lot of experience of testing of this type. The physical (not chemical) nature of the flux residues is the crucial issue in compatibility. If you have a softer residue (either caused by a thick initial solder paste deposit, or a low p
Electronics Forum | Fri Jan 26 13:26:30 EST 2007 | rw
We are developing a new product that requires conformal coating on the motor controller. We selected a silicone based conformal coat due to its ease of use. There has been disagreement among engineers as to its impact on the motor. We have contact
Electronics Forum | Wed Feb 28 20:10:08 EST 2001 | mhunter
Checked the archives with no luck. Anyone have a reliable test method of verifying acrylic conformal coat cure. Using Humiseal 1B31 mixed with approximately 30% solvent, spraying with a Nordson. Thanks in advance.
Electronics Forum | Wed Feb 28 20:16:26 EST 2001 | mhunter
Checked the archives with no luck. Anyone have a reliable test method of verifying acrylic conformal coat cure. Using Humiseal 1B31 mixed with approximately 30% solvent, spraying with a Nordson. Thanks in advance.
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, CA USA
Phone: 18002796835
