Electronics Forum | Mon Jun 12 09:07:10 EDT 2006 | JimC
Flux: Getting enough- is the spray fluxer getting good through-hole penetration. Try cranking it up. Soltec spray fluxers are not really as good as Ultrasonic Systems or Sonotek ultrasonics or the new ServoJET, but should do the job. Also, try anothe
Electronics Forum | Sun Aug 20 21:43:19 EDT 2006 | darby
Yes, I agree with guest. Lay it all out with masking tape on the floor. Include the width of feeders sticking out. Confirm the position of power, air, network and smema connections. You may even want to use cardboard layed out on to the floor. You ha
Electronics Forum | Sat Apr 28 10:56:25 EDT 2007 | basem
Hello Everyone, Since only today I found out that MYDATA is made in Sweden and not in the U.S. and since I do not have much time on hand to figure all things about these machines. I would like your help on the following MYDATA related questions: 1)
Electronics Forum | Tue Feb 26 21:23:21 EST 2008 | davef
Several methods are available for singulating or extricating individual flexible circuits from a processed panel; this discussion of the topic applies to all types of flexible circuits. In general, the methods for singulating flex circuits can be bra
Electronics Forum | Tue Dec 02 14:31:48 EST 2008 | dontfeedphils
Hey guys, just joined the site and I'm looking for some help. In our coating department we are running a Asymtek C-740 with a Jet and film coater. The coating that we are using is Humiseal 1B73 acrylic. The problem that we are having is that the C
Electronics Forum | Fri Nov 18 12:35:15 EST 2011 | rway
As the article eludes to, you still need probe access to measure the pins with TestJet. One thing I wanted to add was the use of JTAG for use with Boundary Scan. Certain devices have JTAG capability, but not all JTAG devices are Boundary Scan compa
Electronics Forum | Mon Aug 23 10:11:55 EDT 2010 | flipit
Hi, I have never been able to find an acceptable dispense process for dispensing small dots of solder paste. I currently have an auger screw automated dispense system and can not accomplish 0.010" dot sizes. In addition, stencil printing is much m
Electronics Forum | Fri Jun 22 21:07:08 EDT 2012 | tank1266
I have had Selective issues such as yours on two very different Selective Solder Machines. I was able to eliminate these issues by using Alpha EF-9301 wave flux with any SAC305 solder. It's a more aggressive flux, but really made the difference. Anot
Electronics Forum | Wed Dec 12 16:12:58 EST 2012 | tombstonesmt
Glad to hear we have more Jade users on the forum! What kind of flux footprint is your fluxer leaving on the board? You called it a "spray" fluxer.. We use the MIC fluxer that functions like a jet fluxer. Do you flux each individual lead or do a
Electronics Forum | Wed Feb 20 10:12:27 EST 2013 | dontfeedphils
Hey Bill, it really depends on the material you're looking at using UR, SR, AR, the easiest to deal with being AR, although if you can find a UR that doesn't clog up the machine too bad those are usually more viscous and easier to apply selectively u