Electronics Forum | Thu Jun 14 20:33:50 EDT 2018 | davef
Try: AGI: agicorp.com/products/tooling/wash-baskets 256-858-3300 JENSEN Tools: jensentools.com/desco-41403-esd-safe-pcb-wash-tray-liner-18-x-18/p/482-89 800-225-5370 Stone Mountain Tool: stonemountaintool.com/fixtures/products/wash-fixtures/ 800-
Electronics Forum | Tue Jul 19 14:03:03 EDT 2022 | ttheis
Reading up I see there is a fixture (part# 1212100) but I am not able to find any information on this. Has anyone ever adjusted the focus of the PEC camera? Anyone know what this fixture looks like? One of our machines is out of focus but still able
Electronics Forum | Wed Feb 07 15:31:05 EST 2024 | proceng1
We have a few custom made fixtures that use a flat disc like that and they are spring loaded. For our "homemade" fixtures, we generally use screws stocking up in the tooling holes that are cut to only stick up approx .050 on an .062 board, so there
Electronics Forum | Thu Mar 16 14:04:14 EST 2000 | Cartman
Greetings. My company has a VOC-Free no-clean wave solder flux with 4% solids. I have a number of questions as they relate to our ICT Fixtures. Currently, we're encountering the following issues: 1.) PM on probes....What is the recommended PM p
Electronics Forum | Tue Sep 15 08:59:59 EDT 1998 | Chrys
| I am running composite fixtures on my wave solder machine and after about 500 passes each (1 month)they are showing serious signs of wear in that the composite surface is bubbling up and glass fibers are also starting to show. | The problem here
Electronics Forum | Fri Sep 11 17:23:00 EDT 1998 | Eric Miller
Hey Dave, sounds like your material is delaminating at a rapid rate, I would not recommend using them through your process, delaminating material has to go some where! When composite material is made, layers of fibre glass and epoxy resin are placed
Electronics Forum | Fri Jul 14 11:34:37 EDT 2000 | Mike F
John, The first thing to check is how tight the boards are being held in the conveyor (assuming you are using a finger conveyor). They should be a little loose at the input end so there is some room to expand. If the boards are held too tightly, when
Electronics Forum | Thu Sep 23 10:20:58 EDT 1999 | Earl Moon
| Question for you SMT guru's out there. | | What is the best way to support boards on Fuji's CP6 machine's x-y table...particularly for 2nd side SMT where the support side already has parts... I am toying around with the following methods: | | 1.
Electronics Forum | Wed Aug 25 10:09:15 EDT 1999 | ray hare
| | Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. | | | | At
Electronics Forum | Thu Aug 26 18:23:21 EDT 1999 | Chad Haima
| Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. | | At a dif
