Electronics Forum | Fri Mar 30 13:06:50 EST 2001 | aortiz
Hi, I need support on the method or applicable standard to measure the shear force strength on chip capacitors and resistors. I know the soldered joints strength is related to land desing, solder volume, pcb and component solderability, component
Electronics Forum | Thu May 06 11:37:48 EDT 2010 | davef
There is no specification. Shear tests are very material / operator dependent. BALL SHEAR TESTING OF RAW BGA DEVICES: A total of 3 devices were subjected to ball shear testing. Results of the testing indicated shear values in the range of 0.7-1.25
Electronics Forum | Fri Aug 05 14:38:50 EDT 2011 | bandjwet
Does anyone know of a vendor able to perform ball shear testing services per JES stds? Thanks! BWET
Electronics Forum | Wed Jun 13 03:37:06 EDT 2001 | ianchan
Hi mates, I did a recent shear test (destructive test), on a uBGA liken product, and noted the post-shear solder joint, had clean "smooth" visual appearance under the uBGA pad, however the matching pcb pad was clearly lifted clean. Question: 1) how
Electronics Forum | Tue Jun 01 12:57:52 EDT 1999 | John Sims
I need to perform shear tests on components that have been glued prior to wave soldering. Can any one recommend a shear tester and some standardized info on testing? We have had problems with poor glue bonds and would like to implement a test metho
Electronics Forum | Wed Oct 06 22:55:14 EDT 2004 | davef
Your customer is correct. Components should not fall a board during a reasonable drop test. A shear test poorly represents a drop test. A drop test represents a drop test very well. If you want to proceed with shear testing, search the fine SMTne
Electronics Forum | Mon Dec 17 08:41:45 EST 2001 | davef
Search the fine SMTnet Archives to develop background on this topic.
Electronics Forum | Wed Jun 02 06:53:44 EDT 1999 | Earl Moon
| I need to perform shear tests on components that have been glued prior to wave soldering. Can any one recommend a shear tester and some standardized info on testing? We have had problems with poor glue bonds and would like to implement a test met
Electronics Forum | Mon Jun 07 11:21:38 EDT 1999 | Brian Wycoff
| | I need to perform shear tests on components that have been glued prior to wave soldering. Can any one recommend a shear tester and some standardized info on testing? We have had problems with poor glue bonds and would like to implement a test m
Electronics Forum | Mon Dec 04 03:40:43 EST 2000 | jmlasserre
Hello, When we discover the broken caps, there are missing and we can observe only either the 2 terminaisons or a small part of ceramic. The defect is due to a shock during the process but it's possible that the caps are fragilized during an operati
