Electronics Forum | Wed Aug 04 16:09:48 EDT 2004 | Dreamsniper
Hi, Thanks for your reply. I run 2 boards, using the same paste, thermal profile and the same method of aqueous cleaning, 1st is a Topline test board with topline BGA (BGA 272 with 1.27 Pitch) and the 2nd is our product PCB with our BGA from Motoro
Electronics Forum | Thu Feb 16 13:21:24 EST 2006 | Bill C
Hi Russ, Thanks for the reply. No this is 856, I sprayed some on boards just to try it out and noticed it dries very quickly also but if its soldered right away as would be the case in the machine, it's fine. I believe I tried some 857 and found th
Electronics Forum | Fri Sep 14 02:28:31 EDT 2007 | Mag10
Thanks davef. Your comments are well taken. How about the trays transporting boards from one station to another or staging at WIP Kanban? It��s easy enough to segregate rework stations and tools. Trays are used thru out the plant without segregation
Electronics Forum | Wed Jul 30 10:48:39 EDT 2008 | wavemasterlarry
Degeaser isn't a good chemical to use either cause it leaves a residue so don't use it. alcohol works good. Not sure why everyone thinks it blows up. heck i remeber back in the day when I hade 24 inch foam fluxers bubbling flux and alcohol (IPA no
Electronics Forum | Tue Apr 22 08:55:54 EDT 2014 | davef
I assume that you're talking about wanting to solder to metal tabs that are spot welded to the battery terminal. These tabs are not meant to be soldered. The metal was special selected for welding. In the old days, you could buy plumbing flux at th
Electronics Forum | Wed Sep 02 16:47:03 EDT 2015 | curiousman
Hi all, My company recently purchased a preowned EBSO SPA 400-F, and I am trying to get it up and running. Still need to get a few other parts like a nozzle and nitrogen generator, but in the meantime I was looking to clean out the residues and oxid
Electronics Forum | Fri Jun 07 11:39:33 EDT 2019 | gregoryyork
I feared so. The only thing to be done is to tell the PCB manufacturer to increase the Thermal cure so dont set the oven to 150C but to 170C and actually measure the middle board and once it hits 155C then give it an hour cure from then. Also insist
Electronics Forum | Mon Mar 25 21:50:10 EST 2002 | davef
Some of this was copped from Fred. There are numerous package types that now fall under the rubric of land grid array [LGA]. Land grid devices [ie, Bumped Chip Carrier� [BCC], LGA, Quad Flat-pack No-lead [QFN], MicroLeadFrame�, etc] are essentially
Electronics Forum | Tue Dec 10 14:10:38 EST 2002 | Randy Villeneuve
Steve, I wave solder most if not all our boards with selective wave pallets. I did not catch if the solder balls were on top of the board or on the bottom but that will make a difference on what to do to get rid of them. Pallets are good and bad. On
Electronics Forum | Fri May 14 16:08:38 EDT 1999 | Chrys Shea
| | | | | I am looking for anyone who has converted over to VOC Free flux. I need some info on any problems, etc. that you might have had. | | | | | | | | | | Please E-mail me at wes.ruggles@vickers-systems.com or call at (513) 494-5229 | | | | | |