Industry Directory | Manufacturer
Entertainment/Manufacturing company that has their own in-house ability for PCB layouts, fabrication and assembly with modern SMT equipment.
Industry Directory | Manufacturer
22-year-old Entertainment/Manufacturing company that does their own in-house PCB layouts, fabrication and assembly with modern SMT equipment.
Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified Jetting Pump and Ti
Jetting Simplified Jetting pumps are excellent for dispensing small volumes of fluid at high rates of speed. The NCM5000 simplifies jetting to its basic elements - this means easy set up, cleaning, and maintenance for you. The drive system is design
Electronics Forum | Wed Jan 31 17:57:07 EST 2007 | blnorman
We've had multiple issues with non-wetting components. You say only one part is not wetting? Profile won't be the culprit, if so you would have more part issues. We've used SnPb with lead-free parts for some time now, no issues. The issues we had
Electronics Forum | Thu Jan 25 12:18:40 EST 2007 | wagoner
There are several smd components in our factory that don't reliably wet to solder during reflow. Paste and placement are good, but the component won't wet reliably. All of the other components on the boards solder fine, but one of these components
Used SMT Equipment | Screen Printers
DEK Horizon 03iX Fully Automatic Screen Solder Paste Printer Model Horizon 03iX Operating System Win XP+09sp13 or up PCB support Tooling&n
Used SMT Equipment | Screen Printers
DEK Horizon 03iX SMT Printer Model Horizon 03iX Operating System Win XP+09sp13 or up PCB support Tooling Magnetic tooling pins Camera type Hawkeye 750 or Hawkeye 1700 (optional) 198040 198043 hawkeye Board foil clamp siz
Industry News | 2013-07-22 09:54:27.0
GPD Global has introduced its new NCM5000 dispense pump for easy jetting. With only two wetted parts and no seals or springs to replace or adjust, field operation is simple.
Industry News | 2017-09-07 23:32:44.0
GPD Global will exhibit at the upcoming SMTA International 2017. At booth# 216, on display is an automated Conformal Coating Machine with excellent repeatability for under $40,000. SimpleCoat is a NEW low cost, inline, simple Conformal Coating System with full featured programming making the conformal coating processes quick and easy to set up.
Parts & Supplies | Pick and Place/Feeders
JUKI 750 760 E93187250A0 HEAD 2 PRESSURE SENSOR ASM. Other juki parts: E9317729AA0 "Z THETA 3,4 POWER CABLE ASM." E93178020A0 PRESSURE SENSOR CABLE ASM. E93178020B0 PRESSURE SENSOR ASM. E93187000A0 SOL CABLE 1 ASM E93187150A0 HEAD 3 PRESSURE SE
_1.jpg)
Parts & Supplies | Pick and Place/Feeders
JUKI 2010 E93237290A0 SERIAL PARALLEL CABLE ASM. Other juki parts: E93227270A0 DETECTOR SENSOR(C)ASM E93227290A0 SERIAL PARALLEL CABLE ASM. E9322729AA0 SERIAL PARALLEL CABLE ASM. E93228020A0 PLACE SENSOR CABLE ASM. (1) E93228550A0 VACUUM DOWN S
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2019-06-11 09:36:13.0
An experiment was recently performed ACI Technologies for a customer that was interested in comparing the wetting of lead-free solders with varying temperature profiles and atmospheric conditions. In order to deliver an objective measurement of solder wetting (in addition to subjective inspection analysis), a simple wetting indicator pattern was added to the solder stencil in an area on the test vehicle that had exposed and unused copper.
http://www.gpd-global.com Tilt-and-Rotate configuration is available. Full featured programming makes conformal coating processes quick and easy. 3-axis Conformal Coating System for printed circuit boards that provides a reliable robotic platform f
http://www.gpd-global.com No drip no drool across a wide range of fluid viscosities (low-to-mid and low-to-high). No manual adjustment to compensate for pump variability. Truly Volumetric PCD Pumps for total control of dispensing fluids. Ability to
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Wed Mar 07 00:00:00 EST 2018 - Wed Mar 07 00:00:00 EST 2018 | ,
Solder Paste Qualification Testing - SMTA Webinar
Events Calendar | Wed May 31 00:00:00 EDT 2023 - Wed May 31 00:00:00 EDT 2023 | Holtsville, New York USA
Long Island Chapter Meeting: Fine Feature Paste Printing, Stencil Design and Solder Technology
Career Center | , Maryland USA | Engineering
Late stage start-up company, well into commercialization, that develops and manufactures products to precisely control the instantaneous release of heat energy for reaction initiation and joining applications. Building from its strengths in material
Career Center | Burbank, California USA | Production
SMT Machine Operator Requirements: Set-up, and operate SMT Machinery Knowledge of PCB layout, fabrication and prototyping PCB layout, component placement, and routing Solder-Paste SMT placement machines and programming Pick-n-
Career Center | Botevgrad, Sofia Bulgaria | Engineering,Production,Quality Control,Research and Development,Sales/Marketing
AOI - Omron RNS/RNS_ptH, VI3000, Marantz 22X IPC-610D Class 3, Pb/Pb free process, 5S, FMEA, MSA, PPAP, SPC, CPK, 6Sigma, lean manufacturing, Quality management, ISO/TS 16949 ,ISO 9001,ISO 14 001
Career Center | Botevgrad, Sofia Bulgaria | Engineering,Production,Quality Control
AOI - Omron RNS_ptH, RNS-LS, VT-WIN2 VI3000 Marantz 22X IPC 610D certified ISO 9001-2008, etc automotive standards ROHS
SMTnet Express, November 19, 2017, Subscribers: 30,938, Companies: 10,768, Users: 23,942 To Quantify a Wetting Balance Curve Frank Xu Ph.D., Robert Farrell, Rita Mohanty Ph.D.; Enthone Wetting balance testing has been an industry standard
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/industries/life-sciences?con=t&page=7
Life Sciences | Solutions in the Life Sciences Industry | Nordson EFD Nordson EFD Corporate | Global Directory | Languages Division Only All of Nordson Home Products Accessories
| http://www.feedersupplier.com/SMT_SMD
. Secondly, via a pick and place machine or hand placement, the components are mounted onto the boards in their respective locations. The wet solder paste will act as a temporary adhesive but it is still important to ensure that the boards are moved gently to prevent misalignment
