Industry Directory | Manufacturer
R&D Technical Services was formed in 1996 to support the Vapor Reflow market and is currently the leading source of Vapor Phase equipment.
Industry Directory | Manufacturer
Manufacturer of convection reflow ovens, vapor phase ovens, convection curing, and IR curing ovens.
Flux Free Formic Reflow Reflow in Formic Acid Vapor Heller has designed and built an production ready horizontal reflow oven for formic acid vapor. This new oven has been designed to meet Semi S2/S8 safety standards (including toxic gases). Form
PCB Reflow Oven Machine I.C.T Lyra Series I.C.T Lyra Series Reflow Oven is made with Nitrogen Standard. Customer can add nitrogen at any time in future I.C.T brings 26 years of experience in the SMT industry. On-site installation and training Availa
Electronics Forum | Wed Nov 17 09:28:40 EST 1999 | Steve Z
Hello, I am new to the SMT area and I need to know what a "good" vapor phase reflow profile should look like. The fluids we are using have a BP of 45 C and 219 C. Thanks,
Electronics Forum | Fri Nov 19 05:12:21 EST 1999 | Graham Naisbitt
Steve, If you can get me your snail-mail address, I will send you some latest information. We actually have a totally new system called Delta 5. It is Condensation Soldering rather than Vapour phase, the difference being that we solder in an air ti
Used SMT Equipment | Soldering - Reflow
REHM Condenso Vapor Phase Reflow Oven Year 2008 Tension: 3 x 400V 50 Hz Power 20 kW Cooling 20 l/m Compressed air 8 bar Aspiration 400 m3/h Length 290 cm, Width 130 cm, Height 165 cm
Used SMT Equipment | Soldering - Reflow
REHM Condenso-Batch Vacuum Vapor Phase Reflow Oven Year 2008 Tension: 3 x 400V 50 Hz Power 20 kW Cooling 20 l/m Compressed air 8 bar Aspiration 400 m3/h Length 290 cm, Width 130 cm, Height 165 cm
Industry News | 2013-08-07 09:58:46.0
The SMTA launched an online re-certification program for engineers whose 10-year SMT Processes Certification is expiring.
Industry News | 2022-10-13 07:44:15.0
I.C.T SMT Vacuum Reflow Oven Machine helps you to solve the problem of High Solder Voids Rates
Technical Library | 2014-03-20 12:37:39.0
In the beginning of SMT, Vapor Phase Soldering was the preferred reflow soldering technology because of its excellent heat transfer capabilities. There were also some disadvantages like fast temperature rise, nearly no influence on the temperature profiles and high costs. So the use of Vapor Phase Soldering was reduced to special applications with high mass or complex boards in low numbers (e.g. for military or aerospace use).
Technical Library | 2013-03-27 23:43:40.0
Vapor phase, once cast to the annals’ of history is making a comeback. Why? Reflow technology is well developed and has served the industry for many years, it is simple and it is consistent. All points are true – when dealing with the centre section of the bell curve. Today’s PCB manufacturers are faced with many designs which no longer fall into that polite category but rather test the process engineering groups with heavier and larger panels, large ground planes located in tricky places, component mass densities which are poorly distributed, ever changing Pb Free alloys and higher process temperatures. All the time the costs for the panels increase, availability of “process trial” boards diminishes and yields are expected to be extremely high with zero scrap rates. The final process in the assembly line has the capacity to secure all the value of the assembly or destroy it. If a panel is poorly soldered due to poor Oven setup or incorrect programming of the profile the recovery of the panel is at best expensive, at worst a loss. For these challenges people are turning to Vapor Phase.
Nano-copper sintering in formic acid vapor.
The Centurion™ is a forced-convection SMT reflow system with tight, closed-loop process control, built for today’s high-throughput PCB assembly environments. With the best heat transfer in the industry, the Centurion is able to run any profile at the
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Thu Oct 03 00:00:00 EDT 2019 - Thu Oct 03 00:00:00 EDT 2019 | ,
IPC Tech Ed Webinar Series: Ball Grid Array (BGA) and Bottom Termination Component (BTC) Design and Assembly Challenges: Reflow Profiling to Achieve Low Defect Rates and Successful Assembly! – Part 2
Events Calendar | Mon Apr 12 00:00:00 EDT 2021 - Mon Apr 12 00:00:00 EDT 2021 | ,
Europe Chapter Webinar: Tombstoning Components during Reflow Soldering - Causes & Cures
Career Center | binan city, Laguna Philippines | Engineering,Maintenance,Technical Support
6.5 Years Experience in Semiconductor Industry Specializing in Dispensing process and Equipment. 5.0 Years of Experience in Field Service Engineering. Machine Commissioning / Customer support 24 / 7, Technical Support for Customer machine and process
Career Center | tulsa, Oklahoma | Engineering
Printed Circuit Assembly Process Engineer. Seeking a position in a high-technology operation, utilizing my background supporting a progressive and growth-oriented organization. Offering the technical experience, expertise, and skills gained during th
| https://www.eptac.com/faqs/ask-helena-leo/ask/vapor-phase-soldering-to-immersion-tin-plated-pads
%3D4684411 Although the temperature of the vapor phase material is high enough, the problem appears to be the tin oxide on the surface of the board which is preventing the reflow of the solder
| http://etasmt.com/cc?ID=te_news_bulletin,9161&url=_print
vapor phase reflow soldering. The reason for such defects is usually caused by the fact that the thermal conductivity of the relevant component leads is too high, and the temperature rises too fast, which causes the upturn of the
