Industry Directory | Manufacturer
BLIND RIVETS,BLIND NUTS,BLIND RIVETING TOOLS,STAINLESS STEEL CABLE TIES
Industry Directory | Manufacturer / Research Institute / Laboratory / School
Manufacturer of surface deposition and plasma surface cleaning and etching equipment offering reliable, repeatable cleaning and etching of PCBs and other materials.
ASC-620 PCB separator improve the PCB’s quality maximumly. It’s use the link-pole to increase the strength, it’s been driven by a small cylinder, it’s need a little gas, but the shear force is very strong. The upper and l
PCB Hot Melt Adhesive Hot Melt Adhesive can apply to fixing and filling of PCB components, such as capacitors, inductors, coils, cables, jumpers, etc. It can provide electronic components the function of fastening, reinforcement, protection, shake
Electronics Forum | Wed Jul 03 03:02:35 EDT 2013 | autoel
How to test the reflow solder joint shear strength? What are the specification to test solder joint shear strength? What are the different methods to test the solder joint shear strength? Vijayashree
Electronics Forum | Wed Jul 03 15:40:17 EDT 2013 | davef
Shear tests are [in my opinion] senseless. The shear stress you measure depends more on the shear rate and on the point where the force is applied than on the grain structure. When shearing a component, you not only apply shear stress, but also roll
Used SMT Equipment | Circuit Board Assembly Products
The product introduction The SM-2009 scissors & pneumatic type separator, we use the most advanced non-stress idea to designed it, it’s help to prevent the chap phenomena as the PCB separated by the general separator, it’s improve the PCB’s quality
Industry News | 2016-02-25 14:29:00.0
SHENMAO Features a new Sn-3.0Ag-0.5Cu Lead-Free Solder Paste PF606-P133H for laser soldering applications. Dispensed from syringes, it is developed for automatic laser soldering processes in the packaging and assembly of surface mount devices and microelectronics. Laser energy is applied at the precise location in a non-contact procedure to create high shear strength well-formed solder joints during the lower thermal stress process while reducing intermetallic formation. PF606-P133H solder paste produces minimal flux residue and no-splash or solder balling issues. It is well suited for high yield soldering of sensitive electronic components in manufacturing or repair of electronic devices that can-not tolerate conventional reflow-oven temperature.
Industry News | 2016-05-31 20:58:06.0
SHENMAO Features a new Sn-3.0Ag-0.5Cu Lead-Free Solder Paste PF606-P133H for laser soldering applications. Dispensed from syringes, it is developed for automatic laser soldering processes in the packaging and assembly of surface mount devices and microelectronics. Laser energy is applied at the precise location in a non-contact procedure to create high shear strength well-formed solder joints during the lower thermal stress process while reducing intermetallic formation. PF606-P133H solder paste produces minimal flux residue and no-splash or solder balling issues. It is well suited for high yield soldering of sensitive electronic components in manufacturing or repair of electronic devices that can-not tolerate conventional reflow-oven temperature.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2013-07-11 15:22:40.0
This research paper will focus on the effect of various parameters that are used to reball a BGA and their effect on the overall shear strength. Factors that will be looked at include the type of BGA (SAC305 or 63Sn/37Pb), the alloy used to reball (SAC405 or 63Sn/37Pb), the type of flux used (Water Soluble or No Clean), and the environment in which reballing takes place (Nitrogen or Ambient).
link:https://www.ascen.ltd/Blog/Solutio/493.html ASCEN PCB separator ASC-620 PCB cutting machine can use for cutting LED long board and also can use to the PCBA with the high component separate operation.It is the best way to replace the way to purch
Model WDD, WDW，WDW-S, WDW-E, WDW-D Series Computer Control Electromechanical Universal Testing Machine Applications Computer Control Electromechanical Testing Machines are designed and manufactured according to ASTM, ISO, DIN, GB etc standards. I
Career Center | Rochester, New York USA | Engineering
I have done my undergraduate studies in Mechanical Engineering. I am pursuing my Master's Program in Electronics Packaging. I am currently working as a Research Assistant for RIT-CEMA (Center for Electronics Manufacturing and Assembly). My research
SMTnet Express July 11, 2013, Subscribers: 26149, Members: Companies: 13418, Users: 34911 Effect of BGA Reballing and its Influence on Ball Shear Strength by S. Manian Ramkumar Ph.D., Andrew J. Daya, Daniel B. Lewanda; Rochester Institute
Strength of Lead-free BGA Spheres in High Speed Loading Strength of Lead-free BGA Spheres in High Speed Loading Concern about the failure of lead-free BGA packages when portable devices such as cell phones are accidentally dropped and a general
| https://www.eptac.com/soldertips/defining-shear-forces-for-surface-mounted-components/
: The IPC does not have any specification that discusses the strength or shear forces of solder or components mounted onto pads or into plated through holes
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/proceedings_abstract.cfm?PROC_ID=4722
. Thus, behaviors of Cu pillar packages during Accelerated Thermal Cycling (ATC) were examined. Correlations between the shear strength and microstructure of Cu pillars were examined for different solder compositions, and for different aging times
