Industry Directory | Manufacturer
BLIND RIVETS,BLIND NUTS,BLIND RIVETING TOOLS,STAINLESS STEEL CABLE TIES
Industry Directory | Manufacturer / Other
STAINLESS STEEL CABLE TIES,BLIND RIVETS,BLIND NUTS,FASTENERS,TOOLS
ASC-620 PCB separator improve the PCB’s quality maximumly. It’s use the link-pole to increase the strength, it’s been driven by a small cylinder, it’s need a little gas, but the shear force is very strong. The upper and l
PCB Hot Melt Adhesive Hot Melt Adhesive can apply to fixing and filling of PCB components, such as capacitors, inductors, coils, cables, jumpers, etc. It can provide electronic components the function of fastening, reinforcement, protection, shake
Electronics Forum | Wed Jul 03 03:02:35 EDT 2013 | autoel
How to test the reflow solder joint shear strength? What are the specification to test solder joint shear strength? What are the different methods to test the solder joint shear strength? Vijayashree
Electronics Forum | Wed Jul 03 15:40:17 EDT 2013 | davef
Shear tests are [in my opinion] senseless. The shear stress you measure depends more on the shear rate and on the point where the force is applied than on the grain structure. When shearing a component, you not only apply shear stress, but also roll
Used SMT Equipment | Semiconductor & Solar
Bondtester by DAGE, in good condition. DAGE Series 4000 Bondtester product information. The 4000 bondtester is multipurpose, capable of performing all pull and shear applications. The 4000 bondtester can be configured as a simple bond wire pull
Used SMT Equipment | Circuit Board Assembly Products
The product introduction The SM-2009 scissors & pneumatic type separator, we use the most advanced non-stress idea to designed it, it’s help to prevent the chap phenomena as the PCB separated by the general separator, it’s improve the PCB’s quality
Industry News | 2018-08-21 20:05:28.0
MIRTEC, ‘The Global Leader in Inspection Technology’, is pleased to announce it has entered into a Technical Collaboration Agreement with YXLON, a company of the Comet Group. This collaboration allows both organizations to explore and expand upon synergistic applications within the SMT Electronics Manufacturing Industry.
Industry News | 2019-10-21 16:37:01.0
MIRTEC is pleased to announce that it has installed one of its Award-Winning MV-6 OMNI 3D AOI Systems at Universal Instruments’ Advanced Process Lab (APL) in Conklin, New York. Universal’s APL offers comprehensive research, analytical and advanced assembly services that enable manufacturers to realize rapid product introduction, maximize yield and optimize reliability.
Parts & Supplies | Other Equipment
AI universal parts 40727505 46737003 SCRAP HOUSING ASSY, OFFSET 46737103 SCRAP HOUSING ASSY, "T" STYLE 46750601 COVER, CLINCH OFF 46750901 COVER, CLINCH VSL 46757801 PICKER AXIS MTR ASSY 46757901 X AXIS MTR ASSY 46758001 Y AXIS MTR ASSY 467
Parts & Supplies | Chipshooters / Chip Mounters
AI universal parts 30997607 46737003 SCRAP HOUSING ASSY, OFFSET 46737103 SCRAP HOUSING ASSY, "T" STYLE 46750601 COVER, CLINCH OFF 46750901 COVER, CLINCH VSL 46757801 PICKER AXIS MTR ASSY 46757901 X AXIS MTR ASSY 46758001 Y AXIS MTR ASSY 46
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2013-07-11 15:22:40.0
This research paper will focus on the effect of various parameters that are used to reball a BGA and their effect on the overall shear strength. Factors that will be looked at include the type of BGA (SAC305 or 63Sn/37Pb), the alloy used to reball (SAC405 or 63Sn/37Pb), the type of flux used (Water Soluble or No Clean), and the environment in which reballing takes place (Nitrogen or Ambient).
link:https://www.ascen.ltd/Blog/Solutio/493.html ASCEN PCB separator ASC-620 PCB cutting machine can use for cutting LED long board and also can use to the PCBA with the high component separate operation.It is the best way to replace the way to purch
Suitable for cutting all kinds of PCB boards with V-cut, SMT circuit boards, aluminum boards, LED circuit boards, LED strips. Mainly used in the LED, SMT, mobile phone / mp3, electric toy, various electronic . please feel free to contact email addr
Career Center | , Maryland USA | Engineering
Late stage start-up company, well into commercialization, that develops and manufactures products to precisely control the instantaneous release of heat energy for reaction initiation and joining applications. Building from its strengths in material
Career Center | Williamsport, Pennsylvania USA | Accounting/Finance,Engineering,Management,Production,Purchasing,Quality Control,Sales/Marketing
Spartronics is more than just a company. We have great facilities, a dedicated and talented team, tremendous capacity and capabilities, and longstanding customers who need us. Now, it’s all about driving forward with a winning strategy that bui
Career Center | Rochester, New York USA | Engineering
I have done my undergraduate studies in Mechanical Engineering. I am pursuing my Master's Program in Electronics Packaging. I am currently working as a Research Assistant for RIT-CEMA (Center for Electronics Manufacturing and Assembly). My research
SMTnet Express July 11, 2013, Subscribers: 26149, Members: Companies: 13418, Users: 34911 Effect of BGA Reballing and its Influence on Ball Shear Strength by S. Manian Ramkumar Ph.D., Andrew J. Daya, Daniel B. Lewanda; Rochester Institute
Strength of Lead-free BGA Spheres in High Speed Loading Strength of Lead-free BGA Spheres in High Speed Loading Concern about the failure of lead-free BGA packages when portable devices such as cell phones are accidentally dropped and a general
| https://productronica.com/en/trade-fair/press/press-releases/detail/back-to-its-old-strength.html
productronica 2023: back to its old strength DE Deutsch English Discover productronica Trade fair topics PCB & EMS SMT Cables, Coils
ORION Industries | http://orionindustries.com/pdfs/formex.pdf
FORMEX GK/FORMEX FLAME RETARDANT POLYPROPYLENE DATA SHEET TEST METHOD FORMEX-10 FORMEX GK-10 FORMEX GK-17 FORMEX GK-30 FORMEX GK-40 COLOR NATURAL NATURAL/BLACK NATURAL/BLACK NATURAL/BLACK NATURAL/BLACK THICKNESS-INCH .010 + .003/ –.0015 .010 + .003/ –.0015 .017 + .003/ –.001 .030 ± .002 .040
