Industry Directory | Manufacturer
Forge Nano provides a range of equipment and services that enable you to build better products with Atomic Armor.
Industry Directory | Manufacturer
PCB Repairs of all kinds including-Solder on Tab (Solder Removal, Gold Plating), PTH & Delam repairs, etc.
ASCEN Auto PCB solder paste printer SE700 model is a very accurate fully automatic SMT stencil printer. It includes a powerful AT-align automatic fiducial finding and PCB board offset adjustment system. After pressing the start key, the PCB
PCB solder paste printer for SMT is needed to screen print solder paste onto the printed circuit board (PCB) before placement of surface mount components (SMD) for Reflow Soldering. Automatic PCB solder paste screen printer with pecial
Electronics Forum | Fri Jan 10 14:49:20 EST 2020 | emeto
Steve I did investigate the transparent nano coat before for performance. We examined 3 different assemblies based in design criteria. In more simplistic designs it is not worth having it. On more challenging designs it is worth. It proved to have be
Electronics Forum | Fri Jan 10 03:40:41 EST 2020 | jakapratama
Hi, Some nano coat supplier said that you can drop water to the surface where the coating supposed to present before to check. If it's beading, it's still there. I take it that you meant by self in-house wiping of coating, yes? Stencil supplier nan
Used SMT Equipment | Coating and Encapsulation
2018 Ultrasonic Systems Inc. (USI) Model: Prism 400 BT Thin Coat Film Applicator * 220VAC Single Phase Power * Dry Shop Air required. * Exhaust 100 CFM @ .2 In WC *Software Version 4.1.9.0 * Windows 7 O/S * Like new condition - appears ma
Used SMT Equipment | Screen Printers
Ekra Type model – X5 Serial-Number – X5 01089 Alignment Repeatability - +12.5 µm@6sigma Printing speed - 9mm/sec to 200mm/sec Printing pressure – 0kg to 26kg Frame size – 736mm*736mm*38mm Pr
Industry News | 2003-05-19 10:06:43.0
The PCB is available with a maximum panel size of 406-by-460mm and a minimum board thickness of 0.8mm.
Industry News | 2018-01-08 18:24:10.0
Nordson ASYMTEK announces that it has acquired the rights and assets to progressive cavity pump (PCP) product lines from Infiniti Dosing o.m.s, based in Polling, Germany. The transaction, which closed on January 5, 2018, provides Nordson ASYMTEK with dispensing and dosing products marketed by Infiniti under the Dot Streamer (DS) and Accura brands. Infiniti's owner and founder, Mr. Jean-Claude Tytgat, will join Nordson ASYMTEK and continue to work on technology developments.
Parts & Supplies | Coating and Encapsulation
We can supply you the following UNIVERSAL Feeders. Also Feeder Parts, Feeder Storage Carts / Feeder Trolley, Feeder Calibration Jig. 49889209 8mm High Performance DL-60 (Gold Plus) 49889210 8mm High Performance DL-60 (Gold Plus) 49889211 8mm High
.jpg)
Parts & Supplies | Pick and Place/Feeders
CYBEROPTICS laser/CYBEROPTICS camera:JUKI laser(570/620/730/740/750/760/2010/2020/2030/2040/2050/2060/2070/2080/KJ-01/KJ-02//FX-1/FX-2/FX-3/3020R/JX-100 laser unit),YAMAHA laser,SAMSUNG laser,TENRYU laser,PHILIPS(ASSEMBLEON) FCM PPU laser,Autotronik
Technical Library | 2020-08-05 18:49:32.0
The evolution of internet-enabled mobile devices has driven innovation in the manufacturing and design of technology capable of high-frequency electronic signal transfer. Among the primary factors affecting the integrity of high-frequency signals is the surface finish applied on PCB copper pads – a need commonly met through the electroless nickel immersion gold process, ENIG. However, there are well-documented limitations of ENIG due to the presence of nickel, the properties of which result in an overall reduced performance in high-frequency data transfer rate for ENIG-applied electronics, compared to bare copper. An innovation over traditional ENIG is a nickel-less approach involving a special nano-engineered barrier designed to coat copper contacts, finished with an outermost gold layer. In this paper, assemblies involving this nickel-less novel surface finish have been subjected to extended thermal exposure, then intermetallics analyses, contact/sheet resistance comparison after every reflow cycle (up to 6 reflow cycles) to assess the prevention of copper atoms diffusion into gold layer, solder ball pull and shear tests to evaluate the aging and long-term reliability of solder joints, and insertion loss testing to gauge whether this surface finish can be used for high-frequency, high density interconnect (HDI) applications.
Technical Library | 2023-05-22 16:42:56.0
Nano-coatings are applied to solder paste stencils with the intent of improving the solder paste printing process. Do they really make a noticeable improvement? The effect of Nano-coatings on solder paste print performance was investigated. Transfer efficiencies were studied across aperture sizes ranging from 0.30 to 0.80 area ratio. Also investigated were the effects of Nano-coatings on transfer efficiencies of tin-lead, lead-free, water soluble, no-clean, and type 3, 4, and 5 solder pastes. Solder paste print performance for each Nano-coating was summarized with respect to all of these variables.
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
Events Calendar | Wed Apr 20 00:00:00 EDT 2022 - Wed Apr 20 00:00:00 EDT 2022 | ,
Virtual Course: Selection Criteria of Surface Finish for Next Generation PCB Technologies
Events Calendar | Wed May 31 00:00:00 EDT 2023 - Wed May 31 00:00:00 EDT 2023 | Holtsville, New York USA
Long Island Chapter Meeting: Fine Feature Paste Printing, Stencil Design and Solder Technology
Career Center | faridabad, India | Engineering,Production,Quality Control
My technical proficiency is extensive and is summarized on my resume (attached). As reflected on my resume (attached) I have completed my B-tech this Year.I am a fresher Electronics Engineer but having 6 months of PCB Assembling,PCB Manufacturing and
Career Center | faridabad, India | Engineering,Production,Quality Control
My technical proficiency is extensive and is summarized on my resume (attached). As reflected on my resume (attached) I have completed my B-tech this Year.I am a fresher Electronics Engineer but having 6 months of PCB Assembling,PCB Manufacturing and
SMTnet Express, November 26, 2017, Subscribers: 30,955, Companies: 13,080, Users: 23,968 Can Nano-Coatings Really Improve Stencil Performance? Tony Lentz; FCT ASSEMBLY, INC. Nano-coatings have been introduced by various manufacturers
SMTnet Express, March 14, 2019, Subscribers: 31,727, Companies: 10,726, Users: 25,833 An Investigation Into The Durability Of Stencil Coating Technologies Credits: FCT ASSEMBLY, INC. It is well documented that Nano coatings on SMT stencils offer
Surface Mount Technology Association (SMTA) | https://www.smta.org/hutchins/hutchins.cfm
. The same year, Ben co-founded a start-up company in Albuquerque, New Mexico which specialized in the production of copper nano-inks as a cheaper alternative to silver nano-inks for inkjet printed electronics
| https://www.eptac.com/faqs/ask-helena-leo/page/2
? Read More Failing to Remove Gold Plating in Final Assembly QUESTION Question: If the gold plating on the surface of via holes is not removed from the printed circuit boards, does this constitute a defect or failure of the
