Industry Directory | Consultant / Service Provider / Manufacturer
Designer & Manufacturer of Acoustic Microscopes for Nondestructive Component Inspection.
ASCEN PCB depaneling machine ASC-620 model can separate the PCB in one time, with minimum internal stress, especially suitable to separation of precise SMD or thin board. Unlike double round blade PCB separator, there won`t be any bow wave or mi
New Equipment | Rework & Repair Equipment
BEST HeatShield Gel™ is a thermal shield water-based gel designed to be used in the PCB rework/repair or board assembly areas in order to provide thermal protection of electronic components. It is truly a revolutionary means to protect components. It
Electronics Forum | Wed Aug 18 08:58:49 EDT 2004 | M.Enright
We are finding cracked capacitors at both first pass and second pass.
Electronics Forum | Thu Aug 19 11:06:59 EDT 2004 | M.Enright
Are all of these parts from the same supplier? No. We have three different suppliers,AVX,Dublier and Kemet.We have had cracked capacitors from reels of each of these suppliers.
Used SMT Equipment | SMT Equipment
Baking SMT on a cheap kitchen toaster oven is not difficult. You just need some patience and exploration good will. In this page you will read the manual procedure to bake SMD boards into a regular kitchen toaster oven appliance. Follows information
Industry News | 2023-01-16 07:35:11.0
The best technical conference papers of IPC APEX EXPO 2023 have been selected. Voted on through a ballot process by members of the IPC APEX EXPO Technical Program Committee (TPC), the paper authors will be recognized during show opening remarks on Tuesday, January 24.
Industry News | 2012-05-04 09:21:15.0
As printed boards evolve and chip speeds increase, the use of microwave technology in commercial applications, such as cell phone towers and in military products, is expanding.
Technical Library | 2022-09-25 20:03:37.0
Cracking remains the major reason of failures in multilayer ceramic capacitors (MLCCs) used in space electronics. Due to a tight quality control of space-grade components, the probability that as manufactured capacitors have cracks is relatively low, and cracking is often occurs during assembly, handling and the following testing of the systems. Majority of capacitors with cracks are revealed during the integration and testing period, but although extremely rarely, defective parts remain undetected and result in failures during the mission. Manual soldering and rework that are often used during low volume production of circuit boards for space aggravate this situation. Although failures of MLCCs are often attributed to the post-manufacturing stresses, in many cases they are due to a combination of certain deviations in the manufacturing processes that result in hidden defects in the parts and excessive stresses during assembly and use. This report gives an overview of design, manufacturing and testing processes of MLCCs focusing on elements related to cracking problems. The existing and new screening and qualification procedures and techniques are briefly described and assessed by their effectiveness in revealing cracks. The capability of different test methods to simulate stresses resulting in cracking, mechanisms of failures in capacitors with cracks, and possible methods of selecting capacitors the most robust to manual soldering stresses are discussed.
Technical Library | 2023-11-27 18:19:40.0
This page introduces major causes and countermeasures of solder crack in MLCCs (Multilayer Ceramic Chip Capacitors). Major causes of solder cracks Solder cracks on MLCCs developed from severe usage conditions after going on the market and during manufacturing processes such as soldering. Applications and boards that specially require solder crack countermeasures Solder cracks occur mainly because of thermal fatigue due to thermal shock or temperature cycles or the use of lead-free solder, which is hard and fragile.
link:https://www.ascen.ltd/Blog/Solutio/493.html ASCEN PCB separator ASC-620 PCB cutting machine can use for cutting LED long board and also can use to the PCBA with the high component separate operation.It is the best way to replace the way to purch
Career Center | Fayetteville, Arkansas USA | Engineering,Production
I enjoyed working in Electronics Manufacturing while in college (BSEE) and would like to pursue an engineering job in a related field.
SMTnet Express, October 28, 2021, Subscribers: 26,544, Companies: 11,461, Users: 26,907 Cracks: The Hidden Defect Cracks in ceramic chip capacitors can be introduced at any process step during surface mount assembly. Thermal shock
Imagineering, Inc. | https://www.pcbnet.com/blog/circuit-board-repair/
. Is there an excess of dust, or does it look like a tiny bug carcass might be in the way? Is something broken or cracked? If you were rough with your device, the PCB might have taken the brunt of your lack of finesse
