Industry Directory | Manufacturer
Shuttle Star Technology designs and builds advanced off-line 2.5D&3D x-ray inspection systems for solder joint and final assembly test inspection in SMT&EMS. It uses world-class X-ray techniques with advanced defect detection.
Industry Directory | Consultant / Service Provider
Elmet LLC is an accredited lab, primarily providing cross sectioning of circuit boards, visual and x-ray inspections of PCBAs and other metallographic and metallurgical services including SEM examination and EDS analysis.
New Equipment | Education/Training
An 8 hour combined lecture, video and hands on session that includes: Soldering techniques for soldering wires to terminals including through-hole components. Identify the different types of solder terminals, connectors, and through hole compone
New Equipment | Component Counters / SMD Counters
S-7200 X-Ray Inspection System Machine X-ray detection equipment is a very advanced detection technology, which can detect the internal structure and contact surface of objects. X-ray inspection equipment can be used to detect the structure of solde
Electronics Forum | Mon Jul 01 15:37:56 EDT 2002 | pjc
Possible cause can be design related- if the solder land is too small. Check w/ IPC SM-782 Solder Land Design Guide Another is board finish. I have seen problems like this with Gold finished PWBs- which creates a more brittle solder joint.Another pos
Electronics Forum | Tue Feb 02 12:31:26 EST 1999 | John
| I have a product using high temperature solder to connect terminal pins to a PCB. The board is single sided copper, no plaiting. The solder is 95% tin 5 % silver. The flux is low activity rosin. The product is a subassembly. When the product i
Used SMT Equipment | AOI / Automated Optical Inspection
(2) Orbotech Automated Optical Inspections Machines For Sale Machine were just taken out of Military OEM facility in good working condition Both machines are being sold together at discounted price See attached pictures and information below
Used SMT Equipment | AOI / Automated Optical Inspection
Description: Orbotech VT 9300 Vintage : SEP 2004 *With Calibration Card *Boards Inspected: Post-solder SMT, through-hole and mixed technologies *Number of CCD Cameras: 13 Cameras *Fault Coverage: Component placement accuracy in X, Y and Q,
Industry News | 2003-05-23 08:24:49.0
Solid cables of up to 35mm2 cross-section now can be connected to PCBs easily, reliably and cost-effectively with the new Power Combicon range of connectors.
Industry News | 2003-02-06 08:28:24.0
Will Premiere Its 2002 Roadmap at IPC SMEMA Council�s APEX Conference in Anaheim, CA, March 31-April 2
Parts & Supplies | SMD Placement Machines
PANASERT / UNIVERSAL / DYNAPERT PARTS FOR SALE N434UQ04041 Tube BLKE01252 FUSE 5A 40833025 FUSE 1.5A 42453904 FUSE 5A 42453907 FUSE 1A 46347803 Relay 40525301 SHOCK ABSORBER KXF0DSSAA00 46849802 SENSOR 46347803 RELAY 47323702 PROX SWITCH PNP N
Parts & Supplies | SMD Placement Machines
PANASERT / UNIVERSAL / DYNAPERT PARTS FOR SALE N434UQ04041 Tube BLKE01252 FUSE 5A 40833025 FUSE 1.5A 42453904 FUSE 5A 42453907 FUSE 1A 46347803 Relay 40525301 SHOCK ABSORBER KXF0DSSAA00 46849802 SENSOR 46347803 RELAY 47323702 PROX SWITCH PNP N
Technical Library | 2020-12-07 15:26:06.0
Temperature cycling testing is a method of accelerated life testing done to PCCs that are exposed to normal operation temperature variations over its lifetime. During the testing, intermittent "open" failures can first occur at the hot and cold extremes of the test, exposing weaknesses in the design and assembly. A poor/weak solder joint fatigues, a via trace or barrel cracks, loose connections or a component fails all causing an intermittent open. When not at extreme temperatures, the PCC assembly relaxes, the "open" closes creating electrical connectivity. If you are monitoring the PCC under test in-situ you will know that an intermittent failure has occurred, and the test could be stopped for inspection. If in-situ monitoring was not implemented, you would not know if there were intermittent failures or not. The PCC gets powered up and works fine at room temperature.
Technical Library | 2014-06-19 18:13:23.0
For high-density electronic packaging,the application of flip-chip solder joints has been well received in the microelectronics industry. High-lead(Pb) solders such as Sn5Pb95 are presently granted immunity from the RoHS requirements for their use in high-end flip-chip devices, especially in military applications. In flip-chip technology for consumer electronic products, organic substrates have replaced ceramic substrates due to the demand for less weight and low cost. However, the liquidus temperatures of high-Pb solders are over 300°C which would damage organic substrates during reflow because of the low glass transition temperature. To overcome this difficulty, the composite solder approach was developed...
http://www.pcb-separator.com/ https://www.pcb-separator.com/html/PRODUCTS/PCB%20separator/2019/1113/832.html Hand push pcb cutter/PCB cutting machine manufacturer/PCB V-cut machine manufacturer/PCB depaneling equipment, automatic pcb cutting machine,
http://www.pcb-separator.com/ https://www.pcb-separator.com/html/PRODUCTS/PCB%20separator/2019/1113/832.html Hand push pcb cutter/PCB cutting machine manufacturer/PCB V-cut machine manufacturer/PCB depaneling equipment, automatic pcb cutting machine,
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Training Courses | ON DEMAND | | IPC-600 Trainer (CIT)
The Certified IPC-600 Trainer (CIT) courses recognize individuals as qualified trainers in the area of quality assurance of bare printed circuit boards and prepare them to deliver Certified IPC-600 (CIS) training.
Events Calendar | Mon Mar 16 00:00:00 EDT 2020 - Mon Mar 16 00:00:00 EDT 2020 | ,
BGA & Area Array Failures, Causes & Corrective Actions Online Webinar
Events Calendar | Mon Jan 14 00:00:00 EST 2019 - Mon Jan 14 00:00:00 EST 2019 | ,
Webinar: Crimp Inspection, Quality Control in the Real World of Manufacture
Career Center | Chicago, Illinois USA | Engineering,Maintenance,Production,Research and Development,Technical Support
The ability to quickly adapt myself with demonstrated leadership and reliability.
Career Center | chicago, Illinois USA | Engineering,Production,Quality Control,Technical Support
• Experience with oscilloscopes, multimeters, spectrum analyzers, frequency counters, signal and arbitrary generators, chart recorders, multi-level printed circuits and other bench shop tools.
SMTnet Express, October 28, 2021, Subscribers: 26,544, Companies: 11,461, Users: 26,907 Cracks: The Hidden Defect Cracks in ceramic chip capacitors can be introduced at any process step during surface mount assembly. Thermal shock
SMTnet Express, June 6, 2019, Subscribers: 31,985, Companies: 10,763, Users: 26,199 Rework of New High Speed Press Fit Connectors Credits: HDP User Group More and more people and things are using electronic devices to communicate. Subsequently
Heller Industries Inc. | https://hellerindustries.com/parts/582722/
Component Cracking Intermetallic Growth on PCB Dull solder joints Spare Parts Support Request Document Request Warranty replacement Global Network Inquiry × 582722
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/select/products/selective-soldering-systems/fx-942-automated-solder-inspection
. With dual-sided, top-down and bottom-up viewing cameras, the FX-942 inspects solder joints and verifies correct part assembly enabling users to improve quality and enhance yields
