Electronics Forum | Fri Mar 22 11:28:13 EST 2002 | sam
I believe you need some sort of "flat top" for this connector. I have ordered special "tops" for connectors we have placed in the past, the top is simply removed before any item is plugged into it. This also protects the connector after the board i
Electronics Forum | Fri Oct 15 17:54:28 EDT 2004 | JJ
Hi, there Any idea if leadfree through hole connector can be used in standard leaded process? If not, why ? Thanks
Electronics Forum | Thu Apr 10 16:02:04 EDT 2008 | brulal1
Hi,we are looking to use Press fit connector on our PCB assemblies. Did anyone out there have any issue with press fit connector? Thank Bruno
Electronics Forum | Tue Jan 04 08:24:31 EST 2000 | vinceh
We are to use a special pressfit connector. Indeed, one side of the connector is overmoulded in a housing, and the other side will be pressfitted on a board. We would like to know: 1) Are such applications yet existing ? 2) What are the type of inser
Electronics Forum | Sun Mar 24 16:53:44 EST 2002 | mikestringer
We place a similar square pin style of connector on one of our products. The connector is a 22mm high HW series from Samtek. We have a Yamaha YVL88 MK1 and YV88XS set up to handle them (Yes they are rebadged as Philips machines in some markets). No
Electronics Forum | Mon Jun 27 06:52:07 EDT 2011 | rpatel28364
Hi All We are facing problem with solderability of BGA connector. After Xray we have found open under BGA connector. After removing from PCB it seems some copper pads are still gold. We are not sure why this is happening. We have 5 thou stencil and
Electronics Forum | Sun Apr 03 00:34:56 EST 2005 | Andrew
Can anyone advise the best aperture opening and stencil thickness for Nexlev connector?We are seeing high reject for open solder.
Electronics Forum | Mon Apr 04 09:30:49 EDT 2005 | russ
Andrew, we need a lot more information to help. 1. what is the open caused from? bemt pins, non-wetting, board bowing, or no paste deposited. 2. What is your current stencil design? 3. What does this connector look like and what are the pins? Rus
Electronics Forum | Tue Jun 28 14:06:08 EDT 2011 | dmiller
If you have room, and the aperture size will allow for it, try a 5 mil overall stencil thickness with a 1 mil step-up in the area of the BGA connector.
Electronics Forum | Tue Oct 15 09:52:38 EDT 2019 | SMTA-Davandran
I seeing connector with butt (I) lead drop off after drop test conducted. the current shear force is about 3kgf. How can this problem improved.
