| http://etasmt.com/cc?ID=te_news_bulletin,18161&url=_print
. When the PCB enters the heating zone, the solvent and gas in the solder paste evaporate. At the same time, the flux in the solder paste wets the pad, component ends and pins, the solder paste softens, collapses, and covers the solder Plate to isolate the pad and component pins from oxygen. B
| http://etasmt.com/te_news_bulletin/2019-09-28/11162.chtml
. At the same time, the flux in the solder paste wets the pad, the component terminals and the leads, and the solder paste softens, collapses, and covers the solder
| http://etasmt.com/te_news_bulletin/2020-07-20/18161.chtml
. When the PCB enters the heating zone, the solvent and gas in the solder paste evaporate. At the same time, the flux in the solder paste wets the pad, component ends and pins, the solder paste softens, collapses, and covers the solder Plate to isolate the pad and component pins from oxygen. B
| http://etasmt.com:9060/te_news_bulletin/2020-07-20/18161.chtml
. When the PCB enters the heating zone, the solvent and gas in the solder paste evaporate. At the same time, the flux in the solder paste wets the pad, component ends and pins, the solder paste softens, collapses, and covers the solder Plate to isolate the pad and component pins from oxygen. B
| http://etasmt.com/cc?ID=te_news_bulletin,21361&url=_print
, (this temperature is also called the peak temperature) for about 5-10 /S In the reflow zone, the solder paste melts quickly and wets the pad quickly
| http://etasmt.com:9060/te_news_bulletin/2020-12-18/21361.chtml
, (this temperature is also called the peak temperature) for about 5-10 /S In the reflow zone, the solder paste melts quickly and wets the pad quickly
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/products/solder-paste/fluxplus-paste-flux
Iron / Alloy42 Nickel Silver Palladium Platinum Silver Solder Plated Stainless Steel Tin Titanium Non-solderable Zinc Flux Types Recommended Use RMA Rosin mildly activated Recommended RA Rosin activated Wets clean surfaces NC No clean Alloy specific (contact EFD
| http://etasmt.com/te_news_bulletin/2020-12-18/21361.chtml
, (this temperature is also called the peak temperature) for about 5-10 /S In the reflow zone, the solder paste melts quickly and wets the pad quickly