Electronics Forum | Mon Sep 09 21:42:12 EDT 2002 | rwilliams
I have been involved with the reflow process for many years. However, my most recent position now includes the use of Nitrogen. In studying the reflow process and using Nitrogen, it seems to me that it would only make sense to be measuring the O2 lev
Electronics Forum | Sat Apr 09 23:14:36 EDT 2005 | MikeaJ
In response to the post concerning the UP1500, the case is a little different. The Speedline/SMTech passwords are hardcoded into the Sigpro.exe file. Here is what you need to know: Login name: Speedline (or SMTech) Passwords are listed in order of ri
Electronics Forum | Wed Nov 17 03:58:18 EST 1999 | Bach Huss
Hi we are running S-15 here and the LED for the component camera is not all bringht at the same brightness level. This cause us to use different .gf for our standard component. It is hard to ballance the illumination level between machines. Does a
Electronics Forum | Wed May 12 07:56:31 EDT 1999 | Joe Belmonte
Folks, I am interested in knowing what level of Nitrogen purity you are running in your reflow ovens for standard SMT assembly? It seems over the last several years people are increasing the Oxygen level in thier reflow oven atmosphere. What purity L
Electronics Forum | Tue Jun 17 01:45:30 EDT 2003 | Dreamsniper
Hi, All these guys have provided you good solid infos already! All I can say is that check your wave solder machine's mechanical set-up too...and the Molten Solder Level in the bath must be maintained at an accurate level/height specially after ded
Electronics Forum | Thu Aug 27 09:58:45 EDT 2015 | fcmtechnician
Hi Take out the steel plate, is acting like a trampoline, oscillating with the machine movements! Is the machine leveled OK? The installation guys use 0.02/1000 Spirit Level ( leveler )? Let the machine on the concrete floor, try first on the top o
Electronics Forum | Wed Mar 15 10:15:26 EDT 2017 | pzappella
Hi Phil, 25% sounds real high to me, any failures available that you can x ray and see what the void level might be? Wish I could call Ford and GM and ask what they really want for void levels. PZ
Electronics Forum | Fri Jun 26 00:33:08 EDT 2020 | victorzubashev
Hello everyone, Can you please recommend a sensor to measure (contactless) level of solder inside of the wave soldering bath? ideally it should be a sensor that can reliably measure distanceto the melted solder and provide distance (as a codified si
Electronics Forum | Mon Feb 25 15:09:06 EST 2002 | jax
Kelvin, You can find the Standard acceptable levels and testing procedures from IPC. Here's a little advice from the fellas' over at PCFAB: As a guideline, we recommend that for assemblies processed with low-solids flux technology and that are not cl
Electronics Forum | pdeuel |
Wed Sep 22 22:13:29 EDT 2004
