Electronics Forum | Thu Sep 24 11:09:02 EDT 2015 | proceng1
We are looking at buying a used HELLER 1800 reflow oven. It is currently set up for 480v and our facility is 208v. I know we can either get it retrofitted or buy a step up transformer. Is retrofitting the machine simply moving a tap on the inter
Electronics Forum | Sat Sep 26 02:09:39 EDT 2015 | aemery
Proc My field service back ground included Electrovert so I know reflow electrical quite well. I've worked on Heller, Conceptronic and Vitronics over the last few years and really there isn't a huge difference if you can read a schematic. I checked
Electronics Forum | Tue May 19 13:29:33 EDT 2015 | dyoungquist
We have been running a Heller 1707EXL for 8 years and added a Heller 1707MKIII about 1 years ago. We have not had any problems with either one of them. We do both lead and lead-free assemblies along with BGA/LGA components. If speed/volume is not
Electronics Forum | Fri Sep 16 14:12:23 EDT 2011 | jtownsend
Anyone have experience or advice to help prevent SMT reed switches from being blow out of position during re-flow? We are using a Heller 1707 MK 3. Is it possible to adjust air flow in the oven or do we need to glue before placement??
Electronics Forum | Mon Mar 16 13:22:25 EDT 2015 | akyzum
Oven is not turning on. No heat. Can hear relays clicking. Any help would be kind.....
Electronics Forum | Wed Jul 22 23:14:40 EDT 2020 | spoiltforchoice
Is that not an option you have to buy when you spec the Oven?
Electronics Forum | Tue Jul 28 13:40:08 EDT 2020 | dwl
It won't hurt anything in the oven.
Electronics Forum | Mon Sep 28 09:31:43 EDT 2015 | proceng1
Proc > > My field service back ground included > Electrovert so I know reflow electrical quite > well. I've worked on Heller, Conceptronic and > Vitronics over the last few years and really > there isn't a huge difference if you can read a > sc
Electronics Forum | Mon Dec 14 10:51:02 EST 2015 | dyoungquist
We have a two Heller ovens, 1707EXL (2006) and 1707MK III (2014). We use them for lead and lead-free reflow soldering including all the tricky components such as BGAs. You may want to go with 8 or 9 zones if you are running high volume but a 7 zone
Electronics Forum | Wed Jul 22 22:19:07 EDT 2020 | kghadiya
Hello Experts, I am using Heller 1707EXL in my shop. From last 2 months I have faced component missing and flying problem. I tried everything to figure out the problem i.e. change solder paste, re-calibrate PnP machine, several oven recipe etc but s
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
