Electronics Forum | Thu May 17 07:45:20 EDT 2018 | vikrantraina
We have Heller Reflow Model 1809 EXL. Today we opened it hood for internal cleaning but now not able to close them. Hood opened more from entry side. We tried to manually force open from exit side & check closing with open/close button, but hood comi
Electronics Forum | Wed May 17 11:09:42 EDT 2006 | wrongway
Hello james I have been useing A heller 1809exl with the blower controls I have had some parts blowing off and adjusting the blowers to low did work for use just so you know that if you do get the option it has worked for use Good
Electronics Forum | Thu Jul 06 12:31:25 EDT 2017 | bmedeiros2017
Hello, Curious to know if anyone has had some experience converting a Heller reflow oven to Cure 1B73 Coating material. Please share experience and process parameters to help obtain cure to conformal coated boards. TIA!!!
Electronics Forum | Wed Jun 24 21:33:39 EDT 2020 | rgduval
Heller is great about their support (at least, they always have been in my past lives). Especially if you bought the machine new. I would suggest giving them a call, and seeing what they can do to help you. They have also turned up in these forums
Electronics Forum | Wed Jun 24 06:18:59 EDT 2020 | bukas
there is a oven setup wizard, I think you should be able to adjust probe offsets there. are the probes original? maybe they are replaced with inadequate ones? also, contacts on TDMs are weak, give them a good clean if you havent already. if you get "
Electronics Forum | Wed Jun 24 14:31:36 EDT 2020 | kumarb
Thank you so much for your comments. It sounds very logical as the probes are indeed the original along with the rest of the insides of this machine (270 hours of on time). The entire module is offset by 50-75 degrees cooler so suspecting that the pe
Electronics Forum | Wed Jun 29 17:56:47 EDT 2005 | Ryan
We have a new Heller 1809 EXL reflow oven and when we run MELF�s or Aluminum Electrolytic Capacitors through the oven they are being blown off the pads. I have verified that the placement is good before reflow. I verified that they are pushed down
Electronics Forum | Wed Jun 24 20:48:48 EDT 2020 | kumarb
Hi. Could we trouble you for more info on this process? We did rename the .ovw file so we have a backup. Then ran the wizard which is asking many questions we left as defaults. Then on page 6 there are the max temp for each heater. From the user manu
Electronics Forum | Wed May 17 10:55:59 EDT 2006 | james
We do not have a fan controller. For some reason our engineer forgot to get that added in the options. We have an 1809EXL model with not fan controller. Heller wants to charge us for that option.
Electronics Forum | Tue Jun 23 22:19:33 EDT 2020 | kumarb
Hi. Have an older 1809EXL that was purchased new and has sat idle for years with 270 on hours as of today. After days of testing, unable to melt fresh paste from Loctite (SAC305). The root cause after the investigation is due to one of the 2 TDM modu
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
