CME Technology Co., Ltd.
CME Technology Co., Ltd. is located in Xianyang, Shaanxi National High-tech Industrial Development Zone, is specializing in manufacturing equipment for mechanical testing and simulation, environmental reliability testing.
CME Technology Co., Ltd. Products
KRD102 Clamping Force Tester [Test Equipment]
KRD102 series clamping force tester is suitable for research, development, quality control and manufacturing of electronics, electromechanical, optoelectronic, automotive, toy, packaging and other industries. It can simulate the situation that the goods in the container ...
KRD101 Packaging Compression Tester [Test Equipment]
KRD101 series packaging compression tester is designed to evaluate the compressive strength of packaging in order to prevent the product from deforming or being damaged during handling, stacking, storage, and transportation due to insufficient packaging ...
KRD100 Incline Impact Tester [Test Equipment]
KRD100 series incline impact tester simulates the ability of product packaging to resist shock damage in the actual environment, such as handling, stacking of shelves, sliding of motors, loading and unloading of locomotives, product transportation, ...
KRD70 Hydraulic Vibration Shaker [Test Equipment]
KRD70 series hydraulic vibration shaker converts the energy of high-pressure liquid into the power of the reciprocating motion of the cylinder through the electro-hydraulic servo valve. Especially suitable for vibration tests requiring low frequency and ...
KRD61 6-DOF Simulation Table [Test Equipment]
KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges connected at the top and bottom platforms respectively. By virtue of the telescopic ...
KRD60 3-DOF Test System [Test Equipment]
KRD60 series 3-DOF test system simulates various mechanical, electrical, and electronic products installed on ships, seaplanes, and other equipment to perform sway and tilt tests to determine the ability and structural integrity of the product ...
KRD51 Transportation Bounce Test System [Test Equipment]
Bounce testing simulates the constant loose cargo state during truck transport. Often times, containers carrying military and civilian hardware (such as: medical supplies, electronics, weaponry, communication devices) travel for extended periods of time and must ...
KRD50 Transportation Simulation Test System [Test Equipment]
KRD50 series transportation simulation test system is to simulate the actual road conditions such as shocks and vibrations during the transportation of various items of a specific load, and to evaluate the effect of the ...
KRD42 Double Lift Zero-distance Drop Test System [Test Equipment]
KRD42 series double lift zero drop tester is mainly suitable for large size packaging products to resist drop impact performance, its powerful power system and unique sample support for easy loading and unloading of oversized, ...
KRD41 Small Drop Test System [Test Equipment]
KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile phones, walkie-talkies, electronic dictionaries, CD / MD / MP3 and so on, applicable standards JISC 0044 ...
KRD40 Zero Distance Drop Test Machine [Test Equipment]
KRD40 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and unique sample holder facilitate easy loading and unloading of oversized and overweight ...
KRD32 Non-standard Constant Acceleration Tester [Test Equipment]
KRD32 series non-standard constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal motion, dual-environmental force constant acceleration motion and central high-speed rotating motion, so as to assess the anti-load performance ...
KRD31 Constant Acceleration Tester (Arm Type) [Test Equipment]
KRD31 series constant acceleration tester is used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7. It is most suitable for testing electronic components or devices. Under high g effect ...
KRD30 Constant Acceleration Tester (Box Type) [Test Equipment]
KRD30 series box-type constant acceleration testing machine is used to determine that electronic components, small components and other electrical and electronic products are subjected to the force generated by the steady-state acceleration (constant acceleration) environment, ...
KRD15 Pneumatic Horizontal Shock Response Spectrum Test System [Test Equipment]
KRD15 series is the state-of-the-art shock response spectrum tester that adopts compressed gas energy to provide impact energy, push the shock hammer to impact the resonance plate, and generate high energy shock. Comparing to traditional ...
KRD14 Pneumatic Vertical Shock Response Spectrum Test System [Test Equipment]
KRD14 series shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural integrity of the test product in ...
KRD20 Pneumatic Bump Test Machine [Test Equipment]
The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic products during transportation or working. Fully pneumatic ...
KRD17 Pneumatic Bidirectional Vertical Shock Test System [Test Equipment]
KRD17 series pneumatic bidirectional vertical shock test system is the novel designed and developed for large specimens that cannot or are not easy to turn over, especially adopt for battery testing. It can complete vertical ...
KRD16 High Impact Shock Test System [Test Equipment]
High impact shock test system meets MIL-S-901D standard which covers shock testing requirements for ship board machinery, equipment, systems, and structures, excluding submarine pressure hull penetrations. The purpose of these requirements is to verify the ...
KRD13 High Energy Shock Test System [Test Equipment]
KRD13 series high energy shock test system is specially designed to meet the requirements of military industry and home appliances. The system adopts the principle of pneumatic energy storage expansion. By adjusting the inflation pressure, ...
KRD12 Pneumatic Horizontal Shock Test System [Test Equipment]
KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the reliability and structural integrity of the test unit in a horizontal ...
KRD11 Pneumatic Vertical Shock Test System [Test Equipment]
KRD11 series pneumatic vertical shock test system is suitable for evaluating the functional reliability and structural integrity of various products under shock or bump environments, thereby improving or optimizing the structural design or layout of ...
KRD10 Hydraulic Vertical Shock Test System [Test Equipment]
KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to evaluate the reliability and structural integrity of products in a shock environment. The ...
Contact CME Technology Co., Ltd.
CME Technology Co., Ltd.
No.3 Upgrade Demonstration Base, West of Yongchang Rd.
West of Yongchang Rd.,High-tech Zone
Xianyang , Shaanxi 712023 China
02938128695
