Orbotech VT 9300
Model: |
Orbotech VT 9300 |
Category: |
|
Model Year: |
2004 |
Condition: |
|
Value: |
$ 5000.00 |
Location: |
California, USA |
Offered by: |
|
| Contact Supplier |
Description:
Orbotech VT 9300
Vintage : SEP 2004
*With Calibration Card
*Boards Inspected: Post-solder SMT, through-hole and mixed technologies
*Number of CCD Cameras: 13 Cameras
*Fault Coverage: Component placement accuracy in X, Y and Q, missing components, component polarity, insufficient or excess solder, tombstone and billboard components, dry joints, co planarity, shorts, lifted leads, blow holes (wave solder)
*Camera:Advanced 3-D imaging utilizing multiple top and angled CCD sensors and two different resolutions for high-speed and high-resolution
operation.
*Lighting: Multiple level and directional Xenon flash lighting array; closed loop illumination control.
*Components Inspected:
All chip components (including 0201)*, all leaded devices down to 0.4 mm fine-pitch and below. Many odd-form components including edge connectors, coils etc.
*High Speed Mode: FOV size 50 x 37 mm (1.97 x 1.46 in.), pixel size 55 x 44 microns
*High Resolution Mode: FOV size 11.0 x 8.0 mm (0.43 x 0.31 in.), pixel size 25 x 20 microns
*Scan Speed: Up to 26.5 cm2/sec (4.01 in2/sec)in High Speed Mode
*Max Board Size:508 x 380 mm (20 x 15 in.) Optional 508 x 457 mm (20 x 18 in.)
*Max Board Height: Top: 50 mm (2 in.); bottom: 80 mm (3in.)
*Dimensions: W 1115 x D 1180 x Hx1400 mm (W 43.9 x D 46.4 x H 55.1 in.)
*Weight: 400 Kg (880 lbs)
*Available Options: (Request Quotation for installed options)
QPC™ - Real-time SPC software
OptiGraf™ Line quality monitoring & reporting software PC2M™ - Process Control and Calibration Module OCV - Optical Character Verification GFR™ - Gerber Format Reader for offline programming of Gerber-based data Barcode scanner High speed handler unit
Off-line programming station
In-line, automated repair station
Company Information:
