DIMA MP100

Model:	DIMA MP100
Category:	Pick and Place/Feeders
Model Year:	2008
Condition:	used
Location:	Netherlands
Offered by:	Fix Trade BV
	Contact Supplier

Type Pick and Place machine
Dimension off-line (L x W x H) 2150 x 1700 x 1500 mm (+500 mm for signal light)
Dimension in-line (L x W x H) 1750 x 1300 x 1500 mm (+500 mm for signal light)
Board thickness min. 0.5 mm - max. 4.5 mm thick
Board size min. 30 x 30 mm - max. 380 x 500 mm (off-line)
 max. 310 x 510 mm (in-line)
Optional extention up to: 550 x 1000 mm. 
Maximum Warpage 0.5 mm up - 1 mm down
Component Height Top max. 16 mm - bottom max. 30 mm
Placement Accuracy 16.7 µm @ 1σ
50 µm @ 3σ, using 1 µm encoders
Placement Rate 3000 cph (IPC rated) - Single placement head
4800 cph (IPC rated) - Dual placement head
6000 chp (based on tact time) - Dual placement head
Components Chip, MELF, SOT, SOIC, TSOP, PLCC, QFP, BGA, LCC, μBGA, etc.
smallest pitch 0.4 mm (with second camera)
Component size 0402 up to QFP208, field of view 42 x 42 mm.
Upgradeable to 0201 with second component alignment camera.
Motion X and Y, AC/DC servo motors with linear encoder and digital motion controller.
Increment Axis X: 0.001 mm, Y: 0.001 mm, Z 0.02 mm, Theta: 0.045 degr.
Control Integrated microprocessor controller with CAN interface combined with PC running on Windows® 7 
Interface Fully SMEMA compatible as option: MP-1290, Conveyer height 865 to 970 mm.
Feeder Characteristics Intelligent feeders,
in-line 30 expandable to 120 8 or 12 mm tape feeders
off-line 30 expandable to 180 8 or 12 mm tape feeders
Number of trays depending on PCB size, tape feeders from 8 to 44 mm,
plastic stick up to 50 mm wide, tray 335 x 185 mm for tape sequencer
Vision System ESI Correctplace®, Automatic board alignment - full vision component alignment and analysis by vision system. Test on lead pitch, sqew angle, BGA bal 
size and number of balls. 
Cameras 1 Fiducial and 1 component align camera with CCD chip
Second component alignment camera is optional
Power Requirement 220 Vac / 50 - 60Hz / 2500 Watt
Air Requirement 6 Bar / 85 PSI / 80 L/Min.
Operating Temperature 18 - 30º Celsius
Noise Level Noise emission during operation < 70 dB(A)
Weight 700 kg without feeders, 950 kg with feeder