YJ Link AXP-70SE Screen Printer (2012)
Model: |
YJ Link AXP-70SE Screen Printer (2012) |
Category: |
|
Model Year: |
2012 |
Condition: |
|
Location: |
Texas, USA |
Offered by: |
|
| Contact Supplier |
YJ Link AXP-70SE Stencil Printer (2012)
Brand: YJ Link
Model: AXP-70SE
Type: Screen Printer
Serial #: HW042073
Year: 2012
Features:
- High Accuracy and High Speed Printing by Servo Motor Mechanism
- High Accuracy ΘAxis Alignment by Harmonic Drive System
- Simple & Easy LAN Interface with Embedded Motion Board and Camera
- Built-in 2D Inspection System
- Easy Model Changeover by Full Automatic Motorized Width Control Conveyors (Loader, Unloader and Stage Conveyors)
- Fail-safe Operation by All Door Inter Lock System
- Pre-Align Mechanism for High Throughput
- Simple & Easy User Interface by separated Windows for Setup and Run Operation
- XML based Data Storage for Machine, Model and Log Data
- Easy to Edit Model Recipe by built-in Copying Function from Previous Model Recipe
- Remote Diagnosis by Machine State Log and built-in Screen Capture Function
Specifications:
PCB Size (LxW)/mm: 50×70 ~ 700×460
PCB Thickness: 0.3mm (Vacuum Jig), 0.4 ~ 5.0mm (Normal)
PCB Support Method: Support Pin, Support Block (Magnetic) Mask
Mask Size (LxW)/mm: 736×736, 800×800, 980×980
Mask Origin: Front, Center, Custom
Squeegee Type: Metal / Urethane Squeegee
Squeegee Speed: 0.1~200 mm/sec
Squeeze Pressure: 0.15~0.50 MPa Auto Pressure Control
Cycle Time: 6.5sec (Except Printing)
Accuracy: ± 0.015mm
Repeatability: ± 0.010mm
Vision Camera: 1 CCD Camera
Camera F.O.V: Board (8x8mm), Stencil (8x8mm)
Illumination Method: Programmable LED Lighting (S/W Control)
Fiducial Types: Unique pattern recognition
Fiducial Size: 0.1~3.0mm
Fiducial Position: Anywhere on PCB
2D Inspection Detection: Insufficient, Incomplete, Excessive Solder, Bridge 0.3 sec/each F.O.V Conveyor
Width Adjustment: Auto (Servo Motor)
PCB Transfer Direction: Programmable (L→R, R→L)
Transfer Height from Floor: 900 ± 30mm (950 ± 30mm: Option)
Black Cleaning System: Wet / Dry / Vacuum / Blower Facilities
Model Changeover time: 2min
Operation System: WINDOWS XP
Monitor: TFT-LCD 17"
Power Requirements: Single-Phase 200~220V AC 50/60Hz
Air Supply Requirements: 0.5MPa ± 0.1MPa
Company Information:
