Sciencgo XG 2000
Model: |
Sciencgo XG 2000 |
Category: |
|
Model Year: |
2011 |
Condition: |
|
Location: |
Austria |
Offered by: |
|
Contact Supplier |
Selling a Demo Axial machine.
Sciencgo XG 2000
The machine is located in Italy and like brand new.
The machine was only few hours in use.
Please make a reasonable Offer
Best regards
Fritz Liebig
Description:
Item name and model:Sciencgo Axial Insertion machine XG-2000
Jump wire insertion and Axial lead components insertion. (2 in 1), rotary table turn clockwise or anticlockwise.
Feature: special servo control system, merge JW and axial insertion into one machine. Jump wire no need sequencing in tape, feed in machine directly from cylinder, save 50%. Higher density and more perfect. Application software bases on windows2000 operating system, user friendly interface, bring you better quality and higher efficiency.
1 Insertion rate 24000PCS / H
2 Non-performing rate Less than 200 PPM
3 Insert direction Parallel 0°,90°,180°,270°
4 Components span Two-Hole Distance 5.0mm-20mm(Insert jumper wire can reach 5mm-30mm)
5 PCB Size (Min)50 mm x50mm、(Max)450mm x 450mm
6 PCB thickness 0.79mm-2.36mm
7 Components available Capacitors, transistors, diodes, resistors, fuse and so on, must be Tape packed electronic components.
8 Jumper Wire (JW) Independent feed device, no need sequencing.. diameter 0.5mm-0.7mm copper wire plated with tin.
9 Clinch Length 1.2-2.2MM (adjustable)
10 Clinch degree 10-35°(adjustable)
11 Machine Size (L × W ×H) 1800mm×1600mm×1800mm
12 Machine Weight 700kg
13 Power supply 220V, AC (single phase) 50/60 HZ, 1.5KVA;
14 System Protection UPS, keep machine run 15 minutes without power
15 Working Power 1200W (Energy-saving)
16 Air pressure 0.5 Mpa
17 Air consumption 0.2 m3/minute
18 Circumstance temperature 5-25°
19 Machine noise 65 dB
20 Coordinate correction Machine vision systems, multi-point MARK vision correction.
21 Driving system AC Servo、 AC motors
22 Data input USB interface input (EXCEL format)
23 Control System English version interface (WINDOWS system control platform)LCD monitor
24 Rotary table Clockwise or anticlockwise
25 PCB transfer mode Manual / automatic optional