PCBA CLEANING MACHINE 5600

PCBA CLEANING MACHINE 5600 Description:

PCBA CLEANING MACHINE 5600

Demensions:600 x 1000 x 1600mm
PCB width:50-400mm
PCB Length:Max 460mm
Pitches:10,20,30mm
Product description: PCBA CLEANING MACHINE 5600, Demensions:600 x 1000 x 1600mm, PCB width:50-400mm, PCB Length:Max 460mm, Pitches:10,20,30mm

PCBA CLEANING MACHINE 5600

Efficient-5600 off-line automatic PCBA washing machine is an energy-saving environmental protection, bulk cleaning integrated high-end cleaning machine, can automatically complete the cleaning, rinsing, drying function.
Mainly used for aviation, aerospace, medical, new energy, automotive electronics and other high-end products such as high-end products, small and medium-sized PCBA board cleaning, can effectively clean the SMT / THT PCBA welding surface residual rosin flux, water-soluble flux , No-clean flux / solder paste and other organic and inorganic pollutants

Features:

1, the whole process of visualization: the cleaning room with a visual window, cleaning room with lighting, cleaning process at a glance
2, automatic cleaning mode: in a cleaning room with a spray to complete the cleaning, rinsing, drying full cleaning process volume occupied area is small, compact structure;
3, the most scientific nozzle design: the use of left and right incremental distribution --- to enhance cleaning efficiency,The upper and lower dislocation distribution - completely solve the cleaning blind area;
4, the nozzle pressure adjustable design: to solve the small size of the PCBA in the high pressure spray under the conditions of the collision, splash problem;
5, the standard dilution tank heating system: greatly improve the cleaning efficiency. Shorten the cleaning time;
6, a comprehensive cleaning system: for SMT; THT PCBA after welding the surface of the residual rosin, water-soluble flux, no-clean flux / solder paste and other organic and inorganic pollutants for thorough and effective cleaning;

7, convenient cleaning agent to add: can be manually added, but also by setting the ratio (5% to 25%) automatically with DI water and chemical solution;
8, dedicated spray tank and auxiliary heating system: spray bath is cleaning and rinsing process to be stored in the work of the cleaning plate to the tank. Cleaning process, the solvent from the dilution tank into the spray tank and continuous heating, pressurized by the high-pressure pump spray from the spray, followed by the use of circular filtration; rinse process, the spray tank is stored in deionized water, and then Pressurized by the high-pressure pump from the nozzle after the rinse water can be heated as needed;
9, lower operating costs: built-in filter device can be used to achieve the use of solvent, reducing the amount of solvent, at the end of the use of compressed air blowing method: recovery of the pipeline and the pump residual liquid, can effectively save 50%
10, the concentration compensation: dilution of the liquid after repeated use of reduced concentration, affecting the cleaning effect and cleaning efficiency, but not dirty enough, waste and waste, concentration compensation can improve the effective use of liquid, add the amount of adjustable.

Specifications:

Keywords:

Professional SMT machine supplier. If you have any needs, please contact us.

Hanwha Pick and Place Machine：XM520, HM520, HM510, Excen PRO, Decan S2, Decan S1, SM485P, SM482 Plus, SM481 Plus, SM471 Plus 

Yamaha Pick and Place Machine: YRM20DL, YRM20, YSM40R, YSM20R, YSM20WR, YSM10, F8S, YS12F, YG12, YG100RA, YS24F 

JUKI Pick and Place Machine: LX-8, RX-8, RX-7R, RX-7, RS-1R, RS-1, RS-1XL,JM-20, JM-100, FX-3RA, KE-3010A, KE-3020VA 

Panasonic Pick and Place Machine: NPM-GH, NPM-DX, NPM-D3A, NPM-D3, NPM-WX/WXS, NPM-TT2, AM100, VM101, VM102 

FUJI Pick and Place Machine: AIMEX III, AIMEX R, NXT III, NXTR-S, NXTR-A, NXT M6 III, NXT M6 Ⅱ, NXT M3 III, NXT M3 Ⅱ, 

Siemens Chip Mounter: SIPLACE XS Series, SIPLACE SX Series, Siplace DX Series, SIPLACE TX Series, 

SMT Stencil Printer: GKG, DEK, JUKI, FUJI, Yamaha, Panasonic, SMT Glue Dispenser, Semi-Auto stencil printer, 

SMT Reflow oven: 6 Zones, 8 Zones, 10 Zones, 12 Zones, Heller, Ersa, JT 

Insert Plug-in machine: Hanwha, JUKI, Yamaha, Panasonic, Offline Insert Plug-in machine, Vertical Plug-in machine, Heterotypic Plug-in machine 

Wave Soldering Machine: Dual Rail Wave Soldering Machine, lead free Wave Soldering Machine, Nitrogen Wave Soldering Machine, Selective Soldering Machine, Ersa Wave Soldering Machine, JT Wave Soldering Machine 

SMT Inspection machine: Saki SPI/AOI, Koh Young SPI/AOI, JUKI SPI/AOI, Omron SPI/AOI, Yamaha SPI/AOI, Flying Probe Testing Machine, X-Ray Inspection Machine, In-Circuit Tester, 

SMT Peripheral Equipment: PCB Loader, PCB Unloader, PCB Conveyor, PCB Transfer Shuttle Conveyor, Auto BGA Rework Station, PCB loader Buffer Stocker, PCB Cleaning Machine, SMT Nozzle Cleaning Machine, PCB Separator Depanelizer Machine, Automatic inline Labelling Machine, SMT Screen Developing and Stripping Machine, SMT Ionic Contamination Tester, SMT Camera Module Cleaning Machine, Reflow Oven Cooler Cleaning Machine, SMT Fixture Cleaning Machine, PCB Stencil Cleaning Machine, PCB Laser Marking Machine, PCB Circuit Repair Machine, Thermal Profiler for reflow oven, 

SMT Spare Parts: JUKI Feeder, Yamaha Feeder, Panasonic Feeder, Sansung/Hanwha Feeder, FUJI Feeder, Seimens Feeder, Mydata Mycronic Feeder, Feeder Storage Cart, Tray Feeder, Feeder Calibration jigs, JUKI Nozzle, Yamaha Nozzle, Panasonic Nozzle, Samsung/Hanwha Nozzle, FUJI Nozzle, Universal GSM Nozzle, Siemens SIPLACE ASM Nozzle, Mydata Nozzle, JUKI Spare parts, Yamaha Spare parts, Panasonic Spare parts, Samsung/Hanwha Spare parts, Siemens Spare Parts, FUJI Spare Parts, Mycronic Spare Parts, 

SMT WORKSHOP LINE: SMT LOADER+ SMT printer+ SMT SPI+ SMT chip mounter+ SMT reflow oven 

Add: No. 4, Yangyong Industrial Zone, Shapu Community, Songgang Street, Baoan District, Shenzhen China  Tel: +86 -137 14564591  Skype:sales@effsmt.com  E-mail:sales@effsmt.com

FAQ
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / phone /Wechat online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.