SMT Reflow Oven With 6 Heating Zones
Company Information:
Name: |
SMT Reflow Oven With 6 Heating Zones |
Category: |
|
Offered by: |
|
SMT Reflow Oven With 6 Heating Zones Description:
Introduction:
No.1 The unique advanced long life heating system
1.The heating system adopt the Swedish nickel heater with efficiency and energy-saving. The peak wave length of the radiation power is 4UM with curved surface reflector to the rising temperature speed, improve the thermal efficiency. And the special forced-air circulation system make PCB and the component heated uniform and eliminate the "shadow effect" completely .
2.Using special high temperature resistant protection system in heating preservation system and special iron in furnace . 3.Using imported Taiwan SanYue long axis of high temperature fan motor and W shaped heat pipe, Model design, no noise, shockless and easy for maintenance . 4.Whole oven are porous aluminum transfer the hot air to guarantee the hot air evenly to the PCB .the whole top oven fixtures can open completely so that easy to clean the oven inside .
No.2 Smooth and reliable transmission system
1.The transmission system use STK adjustable speed motor imported from Taiwan matched with the 1:150 turbine reducer can running smooth ,speed range can be arrived at 0-1000mm/min.
2. Independent wheel structure support and match stainless belt to make the running smoothly and the speed precision is up to ±20 mm/min .
3.Special stainless belt: durable and wear-resistant, not easy to deform and long life.
No.3 Stable and reliable electrical control system
1.It adopts imported thermostat control which owns fuzzy control and PID intelligent precision control system.It can fast response the changes in external heat and ensure more temperature balanced by PID intelligent operation and automatic control heating .
2. Using thermocouple imported from Taiwan by each temperature zone, it can fast and sensitive induct the changes in each temperature zone, transfer and control timely, compensate the temperature balance in each zone .
3. Special SSR solid state relay matched with dedicated radiator improve the heat efficiency greatly and prolong the lifetime effectively. No contact output and fuzzy control function by thermostat, can monitoring the changes of outside temperature and calorific value, controlling the heating device by minimum pulse, ensuring the high precision of the temperature control & the uniform temperature in internal and the length ,direction, temperature distribution, all of these meet IPC standards .
4. Power is abundant, heat up fast, it's only need 20 minutes from room temperature to constant temperature.
5. Failure diagnosis and sound light alarm.
6. Delay shutdown production function, uniform cooling after the shutdown: prevent component deformation.
Specification:
|
Model |
TY-Tech 600 |
|
|
Heating System |
Number of heating zones |
UP 6/BOTTOM6 |
|
Length of heating zones |
2400MM |
|
|
Heating mode |
Up:hot air; bottom: IR |
|
|
Cooling Mode |
Force air |
|
|
Conveyor System |
Max. Width of PCB |
400mm |
|
Mesh belt width |
400mm |
|
|
Transmission Direction |
L→R(or R→L) |
|
|
Transmission Net Height |
880±20mm |
|
|
Transmission type |
Mesh |
|
|
Conveyor speed |
0-1000mm/min |
|
|
Fixed rail side |
Front rail fixed(option:rear rail fixed) |
|
|
Control system |
Power supply |
5 line 3 phase 380V 50/60Hz |
|
Total power |
28kw |
|
|
Starting power |
24kw |
|
|
Normal power consumption |
4KW |
|
|
Warming time |
About 20 mins |
|
|
Temp. setting range |
Room temperature-300℃ |
|
|
Temp. control method |
PID close loop control & SSR driving |
|
|
Temp. control precision |
±1℃ |
|
|
Temp. deviation on PCB |
±2℃ |
|
|
Data storage |
Process Data and status storage (80 GB)(machine with PC) |
|
|
Nozzle plate |
Aluminum Alloy Plate |
|
|
Abnormal Alarm |
Abnormal temp. (extra-high/extra-low temp.) |
|
|
Board dropped alarm |
Tower light:yellow-warming, Green-normal, Red-abnormal |
|
|
General |
Dimension(L*W*H) |
3500×700×1320mm |
|
Weight |
600KG |
|
|
Color |
Computer gray |
|
TYtech company provide full SMT/DIP production line, including reflow oven, wave soldering machine, pick and place machine, solder paste printer, AOI/SPI, smt handling machine, smt peripheral equipment etc. Any more details please feel free to contact us by wechat/whatasapp: 008615361670575, email: frank@tytech-smt.com. Web: www,tytech-smt.com
SMT Reflow Oven With 6 Heating Zones was added in May 2022
SMT Reflow Oven With 6 Heating Zones has been viewed 103 times
20 More Products from Shenzhen TY Electronic Technology Co.,Ltd :
