Multiple Groups Of Blades PCB Separator is equipped with standard 20 groups of blades which can separate 10 LED bars at same time , compared with traditional single blade cutter , it greatly improve the production efficiency and reduce labour costs.
Features:
<...
|
Depaneling |
MDS-901 is equipped with 2 groups of cutters which can cut aluminum and FR4 LED board without burrs and deformation, it can separate 230mm width board simultaneouly, 280mm width board is also optional. it greatly improve the production efficiency and reduce labour costs....
|
Depaneling |
AI-606 Standard Insertion platform with various component feeder which can easily help you realize insertion automation especially for combined standard and odd shape components ....
|
Through-Hole |
MDS-620 cuts flexible and ultra-thin PCBs clean, with no ripping or tearing, the linear rather than circular, cutting surfaces allow for faster separations without added stress.
MDS-620 Pneumatic Linear PCB Separator Features:
Adjust blades to PCB score lin...
|
Depaneling |
Quick Overview
Air Circulation Lead-Free Reflow Oven
With 8/10/12 controlled upper and lower air cirulation heating zones,the E- thermal A8/A10/A12 Series SMT reflow ovens, with thermal accuracy of ±1˚C.
Air Circula...
|
Reflow |
Electronic industrial, electrommunication, Auto parts, metals, watches and other metal or nonmetal products but not highly reflective meterials....
|
Industrial Automation |
4-axis Scara robot use the multi-axis linear interpolation, 3D space circular interpolation, follow the track, smooth acceleration and deceleration, continuous trajectory speed adaptive function, spline teach, vibration suppression, and other advanced features that make 4-axis Scara robot ...
|
Other |
Motor-driven MDS-700 With unique cutting method, the circuit board is cut by A, B, C, three groups of circular blades. The whole cutting process is divided into three stages which can reduce 80% stress compared with the traditional separator and make the separated aluminum plate without deformation ...
|
Depaneling |
Practical, dependable motorized MDS-501/502/503 PCB Separator providing reliable, burr-free separation with no stress to the boards or nearby components.
MDS-501/502/503 Dual Circular Blade Motorized PCB Separator Features:
Dual circular blades e...
|
Depaneling |
ICT fixture,abbreviation of In-circuit-test fixture,is a kind of inspection amd test fixture which performs inspection on the electrical performance and electrical connection of the components in process for any manufacturing defects and bad components.It is mainly used to check the individual compo...
|
Board Handling - Pallets, Carriers, Fixtures |
The AD-200 is an automated desktop type selective coating robot with a precision spraying valve and material tank to provide a desktop type slective coating solution....
|
Coating Equipment |
1.Minimal down
2.Integrated residue management
3.User-friendly software tools for process monitoring
4.Modular system concept
5.Efficient heat transfer
6.Stable process for lead-free applicat...
|
Reflow |
Motor-driven MDS-508-500/509-500 separates v-scored PCBs without stress to boards, components or solder joints. It is suited for medium to high-volume production. Cut length is fully programmable; programmed length is displayed on an LED readout.
MDS-508-500/509-500 Motorized PC...
|
Depaneling |
The PCB's are collected from upstream machine using attached conveyor and pushed into the magazine....
|
Board Handling - Conveyors |
The Belt conveyor adopt quality motor with invertor controller, quality belt and driving mechanism, ensure smooth and low noise conveying, equipped with work table, instrument shelf, LED light, multifunction socket, it is very suitable for electronicproduction assembly line....
|
Board Handling - Conveyors |
The inspection conveyor is used when frequent visual inspection of PCB’s is required in the PCB assembly line....
|
Board Handling - Conveyors |
The automatic tape cutting machine TC-680 handles waste tapes for chip mounter without manual work. It can entirely replace manual work by cutting SMT tapes regularly for recycling. It needs no dedicated site to place waste tapes but still realizes high-efficiency paid recovery processing....
|
Pick & Place |
Z-500 Bottom inspection type inline AOI Machine is deal for bottom side component inspeciton, and inline wave solder inspection. With core accurate positioning technology which can deal with PCB warpage and flexible board to reduce false report. Stable granite platform with precision servo ...
|
Inspection |
Fast, Accurate, Economical PCB Separator for Panels up to 350mm Long.
MDS-510 Manual PCB Separator Features:
Circular blade cuts against linear blade to ensure clean, burr-free processing without board stress.
Quick-lock blade for easy boa...
|
Depaneling |
This X-RAY chip counter machine can greatly improve the production efficiency, to realize the automation and electronic components inventory management information, the main principle through X-ray penetrate the imaging principle of image information, for items of the SMT production materials, nonde...
|
Rework & Repair Equipment |
Solder paste thickness inspection BT-460 is mainly used to measure the thickness of solder layer on PCB. Its principle is that a very thin laser beam is emitted by the laser to illuminate the PCB at a certain Angle, and then the camera is used to observe the laser beam forming a thin line on PCB.Sol...
|
Rework & Repair Equipment |
The ADS- 3530 is an ideal automatic dip soldering machine which is more efficient and reliable than hand soldering or manual dipping, it adopts a pin-type, fixture-less board holder for PCBs up to 350 x 300 mm. Dip soldering speed and angle is adjustable through controlling left and right elevator m...
|
Wave Soldering |
H450 with automatic recognition function of machine vision, using high-precision Servo drive system to achieve fast and accuracy alignment .The precision can reach +/- 0.01mm.It build in independent cleaning system, the cycle time less than7s,ensure the high printing quality of solder paste and ulti...
|
Printing |
Motor-driven MDS-700 With unique cutting method, the circuit board is cut by A, B, C, three groups of circular blades. The whole cutting process is divided into three stages which can reduce 80% stress compared with the traditional separator and make the separated aluminum plate without deformati...
|
Depaneling |
Quick Overview
Max 180 x 235mm soldering area
Infrared IC Heater T962 is a micro-processor controlled reflow oven, works automatically by micro-computer control. It can satisfy a dissimilarity SMD、BAG soldering a request on a PCB assembly. The T962 m...
|
Reflow |
Accurate, repeatable location of PCB.Protect bottom side components from double-sided reflow.Prevent distortion and support the board through printing, placement and reflow without operator intervention....
|
Board Handling - Pallets, Carriers, Fixtures |
Hand-crank Radial lead trimmer for taped parts are easy to set up, place minimal stress on components....
|
Through-Hole |
S331 is a 5 axis servo soldering robot with X,Y,Z,R,and solering wire feeding motion system. it is equipped with 150W heating system with rapid heat recovery ,soldering tip is easy to be exchanged with low cost .Break-tin automatic solder wire feeder can reduce flux rema...
|
Soldering Robots |
AI-654 Standard Insertion platform with various component feeder which can easily help you realize insertion automation especially for combined standard and odd shape components....
|
Through-Hole |
Application of WZ-1202 and WZ-1206 : thick film circuit, pressure sensor (piezoresistive type, capacitance type), glass glazed potentiometer, dielectric antenna, ceramic metallization, microwave oven magnetron RFID, automobile oil level sensor, air quality sensor, integrated LED
...
|
Printing |
AR-2530D PCB Saparator adopt servo driving system and high quality routing spindle which can ensure<0.05mm routing accuracy , x,y1,y2,z1,z2 ,u axis moving speed can reach 500mm/s , routing speed can reach 50mm/s. and machine is equipped high resolution CCD which can automatically position fidu...
|
Other |
All the standard adjustable table all can
match anti-static caster wheel, Used
together with reinforced metal foot cup
Can enhance the bearing capacity of the table
...
|
Board Handling - Pallets, Carriers, Fixtures |
Programmable temperature and humidity chamber, also known as environmental chamber, it test the performance of heat, cold, dry, humidity resistance for material, it is suitable for test of electronic devices, instruments, plastic products, metal, food, chemical etc....
|
Test Equipment |
A full range of various dry storage cabinets ensures that your production is based on the IPC/JEDEC Standard STD-033B for moisture sensitive devices....
|
Other |
Fully-automatic screen printer H1500 with automatic recognition function of machine vision, using high-precision servo drive system to achieve fast and accuracy alignment .It build in independent cleaning system, the cycle time less than 10s,ensure the high printing quality of solder paste ...
|
Printing |
H610 with automatic recognition function of machine vision, using high-precision Servo drive system to achieve fast and accuracy alignment .It build in independent cleaning system, the cycle time less than 7s,ensure the high printing quality of solder paste and ultimate product efficiency. It also c...
|
Printing |
VR-450 PCB Router adopt high precision all servo driving system and high quality routing spindle which can ensure<0.05mm routing accuracy. XYZ moving speed can reach 800mm/s, routing speed can reach 100m/s. The machine is equipped with high resolution CCD which can automatically position fiduc...
|
Depaneling |
Semi-automatic Taping machine SAB-10 can be used for taping and coling various SMD parts.It has point actionsealing and horizonal press continuous sealing two models.Suitable for self-adhesive cover tape and hot sealing cover tape.The pull strength can be adjusted,temperature is stable.Adop...
|
Other |
Manual PCB Separator MS-1 is suited to separate various connecting joint of PCB.It is adopt hooked cutter separating method, customized cutter is available....
|
Depaneling |
High Performance 3 Axis Selective Coating Machine SC-800 is equipped with high precision servo control system , various valves , CCD system ,material tank weight detecting system etc, which can provide a high efficiency conformal coating process .The maximum coating size can reach 400mm*450mm with S...
|
Coating Equipment |
AI-606 Standard Insertion platform with various component feeder which can easily help you realize insertion automation especially for combined standard and odd shape components ....
|
Through-Hole |
E4/E6 is a capable lead free CE certificated reflow oven with 4/6 upper&4/6 bottom individual hot air convection zones, pin chain&mesh belt inline conveyor. It's the best choice to go with small volume pick&place machine like Autotronik, TWS, DIMA, ESSEMTEC e...
|
Reflow |
Quick Overview
Special for LED board and long PCB printing
Fully-automatic screen printer H1200 with automatic recognition function of machine vision, using high-precision servo drive system to achieve fast and accuracy alignment .The precision can ...
|
Printing |
Workbench support + tailgate + Former beam
for combined,Disassembling convenient.
Uniform load,Static load:500kg,
Dynamic load:300kg
...
|
Board Handling - Pallets, Carriers, Fixtures |
Economical & motorized loose radial lead cutter eliminates time-consuming manual trimming.
Stop trimming leads manually!
Linear Feeding on trail with automatic feed...
|
Through-Hole |
MDS-620 cuts flexible and ultra-thin PCBs clean, with no ripping or tearing, the linear rather than circular, cutting surfaces allow for faster separations without added stress....
|
Depaneling |
Master-1000 loaded with features that make it the industry"s most reliable and affordable solution for the widest range of SMT repairs. Safe Removal, High-Precision Placement, and Perfect Soldering for Any SMD Repair Applications....
|
Rework & Repair Equipment |
H450 with automatic machine vision recognition function uses high-precision servo drive system to achieve fast and accuracy alignment. The precision can reach +/- 0.01mm. It has built in independent cleaning system, the cycle time less than 7s ensures high printing quality of solder paste and ult...
|
Printing |
Quick Overview
Best Choice To Go With Volume Production
M10 G2 is a capable lead free CE certificated reflow oven with 10 upper & 10 bottom invidual hot air convection zones and 2 cooling zones with chiller, pin chain & mesh belt inline ...
|
Reflow |
ASD-L206 Double X/Y/Z axis Step motor and driving system.Suited for one product which have 2 kinds of screws. High quality screw driving and feeing system.PLC and touchscreen control system.Screw locking range (X/Y/Z) :450/210/ 60mm * 2 work table.High accuracy: repeata...
|
Industrial Automation |