ASCEN LED conformal coating machine can apply several types of coatings to Light Emitting Diodes (LED’s), including parylene. Conformal coating electronic encapsulation processes offer superb protection for your products and will lengthen their working life.
|
Coating Equipment |
Conformal coating equipment from ASCEN technology provide unique conformal coating solution for all of the different coating material technologies,this include selective coating,brush coating, aerosol coating,atomised spray coating. The precision and coating services of our PCB con...
|
Coating Equipment |
ASCEN PCB coating machine can be configured with many different dispense and spray valves, including the high-speed airless Curtain valve. Up to three valves can be mounted on the independent Z-axis, with two capable of tilting (4-axis) and rotating (360 degrees). ASCEN solution of...
|
Coating Equipment |
ASCEN PCB Surface coating machine protective coating for PCBs and other electronic components from environments that contain moisture and/or chemical contaminants.the conformal coating is a thin, it can be removed easily with most common solvents.Use PCB Surface coating machine&...
|
Coating Equipment |
ASCEN PCB conformal Coating machine provides the highest productivity and quality for your automated coating processes.The precision and coating services of our PCB conformal coating equipment and case-specific adaptability are second to none.
Prov...
|
Coating Equipment |
Manual bend axial lead former ASL-820U cuts and bends the taped axial components and loose axial component for horizontal mount configuration(U shape assembly).
Features:
1...
|
Lead Forming |
ASCEN manual axial cut and bend machine AL-820F,use to cut and bend for taped or loose axial components for vertical mount.
Features:
1. Axial cut and bend machine suitable...
|
Lead Forming |
ASCEN Axial Manual Cut & Bend Machine cuts and bends the taped axial components and loose axial component for vertical mount configuration(F shape assembly).
Features:
|
Lead Forming |
ASCEN ASL-809UK model with the loose part feeder to cut,bend and form with dies. This loose component lead former use for cutting,bend and forming taped axial components and loose axial component into UK shape assembly.
<...
|
Lead Forming |
ASL-809U model is automatic loose axial component trimmer, use for cut and bend axial components at speeds up to 25000PPH with ASCEN famous cut/bend axial lead forming system
Features:...
|
Lead Forming |
ASCEN ASL-809FK model with the loose part feeder to cut,bend and form with dies. This loose component axial lead former use for cutting,bend and forming taped axial components and loose axial component into FK shape assembly.&...
|
Lead Forming |
Cut and bend machine with the loose part feeder for loose axial components. loose component axial lead forming machine be often used the axial resistance and diode. This is the automatic lead trimming equipment, you can use this axial lead ...
|
Lead Forming |
ASCEN axial component de-taping former use for unloading tape for the taped axial component. Separation the tape of the taped axial lead component that can solve the component problem of lead length not enough
&l...
|
Lead Forming |
ASCEN automatic axial lead de taping machine AS-830 use for unloading tape for the taped axial component. Separation the tape of the taped axial lead component that can solve the component problem of lead length not enough.automatic de taping machine can separation t...
|
Lead Forming |
ASCEN axial component de taping machine AS-830 use for unloading tape for the taped axial component. Separation the tape of the taped axial lead component that can solve the component problem of lead length not enough.automatic de taping machine can separation the tape and for...
|
Lead Forming |
manual axial component trimmer/formmer cuts and bends each side of an taped axial components to 90°for horizontal mount configuration(U shape assembly).
Features:
1...
|
Lead Forming |
ASCEN manual lead trimming equipment AS-820F,use to cut and bend for taped axial components for vertical mount.
Features:
1. Suitable for taped axial components be...
|
Lead Forming |
axial component lead bender as component lead forming equipment,it cuts and bends each side of an taped axial components for vertical mount configuration(F shape assembly).
Features:&...
|
Lead Forming |
ASCEN taped axial component lead former AS-810UK, use for cutting,bend and forming for axial components braid resistor,capacitor, inductor, diode and other electronic components foot cutting and forming into UK shape horizontal assembly
|
Lead Forming |
axial lead forming machine with dies for taped axial components. ASCEN lead forming equipment AS-810UK model use for cut and horizontal bend for taped axial component. Various dies are available for each version.
|
Lead Forming |
ASCEN component lead forming equipment use for cutting,bend and forming for axial components braid resistor,capacitor,inductor,diode and other electronic components foot cutting and forming into FK shape assembly
...
|
Lead Forming |
Cutting,bend axial component forming machine with dies for taped axial components. ASCEN component axial lead former AS-810FK model use for cut and vertical bend for taped axial component. Various dies are available for each version.
|
Lead Forming |
motorized version cut axial lead forming machine, use for cut and bend axial components braid resistor,capacitor, inductor, diode and other electronic components foot cutting and bending into U shape assembly
|
Lead Forming |
motorized version axial component lead cutting and bending machine, use for cut and bend axial components braid resistor,capacitor, inductor, diode and other electronic components foot cutting and bending into U shape assembly
<...
|
Lead Forming |
Cut and bend machine for taped axial components. Taped component axial lead former be often used the axial resistance and diode. This is the motorized type former, you can use this axial lead forming and cutting machine form only or cut only.or forming and cu...
|
Lead Forming |
ASCEN PCB cutting machine ASC-620 model can be customized by the customer’s special demand, and to resolve the problems of the tin point, the parts or the circuitry of the PCB when separate the combined PCB and causes the risk of stress. It&rsqu...
|
Depaneling |
ASC-620 PCB separator improve the PCB’s quality maximumly. It’s use the link-pole to increase the strength, it’s been driven by a small cylinder, it’s need a little gas, but the shear force is very strong. The upper and lower bl...
|
Depaneling |
ASCEN 620 model PCB separator& pneumatic type separator, we use the most advanced non-stress idea to designed it, it’s help to prevent the chap phenomena as the PCB separated by the general separator, Unlike double round blade PCB separator, there won`t be an...
|
Depaneling |
ASCEN PCB cutting machine ASC-620 model can separate PCB board with high component placed close to the edge can be separated safety, with minimum internal stress, especially suitable to separation of precise SMD or thin board. Unlike double round blade PCB separator, ...
|
Depaneling |
PCB depaneling machine 620 model from ASCEN technology, this PCB depaneler with high cutting precision, because the pneumatically driven control, ASCEN pcb depaneling machine shearing process without vibrations,enables boards of less than 1 mm thickness to be...
|
Depaneling |
ASCEN PCB separator is pneumatically driven type and straight knife type PCB cutting machine,Based on a proven method of separating, wedge-shaped knives are used to cut the panels within the groove. This enables boards of less than 1 mm thickness to be separa...
|
Depaneling |
ASCEN PCB depaneling machine can separation the PCB board with high component placed close to the edge can be separated safety. 620 model PCB depanelizer application cover the PCBA manufacturing,LED lighting,electronic product assembly.it is very pop...
|
Depaneling |
ASCEN PCB cutting machine is pneumatically driven and electric control. The straight knife type separator machines were designed to separate pre-scored panel boards carefully, without bending or tension stress.
&...
|
Depaneling |
PCB depaneling machine use for the electronic factory that cover the PCBA manufacturing,LED lighting,electronic product assembly. ASC-620 cutting equipment can use for cutting LED long board and also can use to the high component PCBA separation operation<...
|
Depaneling |
ASCEN PCB depaneling machine ASC-620 model can use for aluminum substrate,FR4,CEM-1,MCPCB multiple type material ,it can suitable for cutting maximum 4mm thickness PCB panel without the bend and twist with high durability and long life time
&...
|
Depaneling |
ASCEN PCB cutting machine can use for cutting LED long board and also can use to the PCBA with the high component separate operation. It is the best way to replace the way to purchase multiple cutting machine
<...
|
Depaneling |
ASCEN PCB separator 620 model uses wedge cutter to shear PCB in line, internal stress decreases to lowest point, even the sensitive SMD modules or capacitance still won`t be influenced, then potential risk on quality is minimized. to avoid PCB solder crack or...
|
Depaneling |
ASCEN PCB depaneling machine ASC-620 model can separate the PCB in one time, with minimum internal stress, especially suitable to separation of precise SMD or thin board. Unlike double round blade PCB separator, there won`t be any bow wave or micro crack generated.<...
|
Depaneling |
ASCEN PCB cutting machine as pcb depaneling equipment mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer. Most of time, one set of this type PCB cutting machine can satisfy for t...
|
Depaneling |
PCB depaneling often happen right after SMT processing or after soldering,or after in-circuit test in the assembly line.PCB depaneling machine to be a important equipment in high-volume electronics assembly production. To choose the ASCEN PCB depaneling machine 900 mo...
|
Depaneling |
ASCEN pcb depaneling machine 900 model can separate up to 20 PCBs simultaneously, it mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer. Most of time, one set of this type PCB de...
|
Depaneling |
ASCEN PCB separator 900 model can separate up to 20 PCBs simultaneously, it mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer. Most of time, one set of this type PCB cutting machine can ...
|
Depaneling |
ASCEN PCB separator can cutting up to 20 PCBs simultaneously, it mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer
p...
|
Depaneling |
ASCEN PCB depaneling machine as pcb separation equipment mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer. Most of time, one set of this type PCB cutting machine can satisfy fo...
|
Depaneling |
ASCEN PCB depaneling machine as pcb separation equipment mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer. Most of time, one set of this type PCB cutting machine can satisfy fo...
|
Depaneling |
ASCEN PCB cutting machine ASC-900 model can separate up to 20 PCBs simultaneously, it mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer
<...
|
Depaneling |
ASCEN PCB cutting machine 900 model can separate up to 20 PCBs simultaneously, it mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer. Most of time, one set of this type PCB cutti...
|
Depaneling |
SMT automatic loader is designed for unloading of PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The magazine indexes to the next position and is ready for the following unloading cycle. <...
|
Board Handling - Conveyors |
ASCEN PCB board handling equipment for automated assembly of PCB’s. SMT pcb loader is used for providing pcb to following machine according to producing requirement in the starting process of on-line smt manufacturing line, SMEMA protocol is applied for communication...
|
Board Handling - Conveyors |
ASCEN PCB board handling equipment for automated assembly of PCB’s. PCB magazine loader is used for providing pcb to following machine according to producing requirement in the starting process of on-line smt manufacturing line, SMEMA protocol is...
|
Board Handling - Conveyors |