Automatic PCB inverter / flipper
Features
▶User friendly 'soft-touch' LED control membrance control panel.
▶Enclosed design with turn limiter ensures highest level of safety.
▶Top cover can be opened for easy access to hardware during maintance.<...
|
Board Handling - Conveyors |
Automatic NG OK Vertical Buffer BN-L-TN
Features
▶User friendly membrane control panel.
▶Use wear-resistant anti-static belts for transmission (convenient belt replacement)
▶Three operation modes:FIFO.LIFO.Pass-through.
▶Parallel a...
|
Board Handling - Conveyors |
Automatic Glue Dispenser DMDJ331
Features
▶Humanized design, Chinese hand-held teaching box operation, convenient programming, easy to learn;
▶ It has the functions of drawing points, lines, surfaces, arcs and various irregular curves continuo...
|
Dispensing |
Automatic Glue Dispenser DMD221
Features
▶Humanized design, hand-held teaching box operation, convenient programming, easy to learn.
▶It has the functions of drawing points, lines, surfaces, arcs and various irregular curves continuously and u...
|
Dispensing |
Hanwha Decan S2 SMT Pick And Place Machine
Hanwha Decan S2 SMT Pick And Place Machine
HIGH PRODUCTIVITY
Optimizing PCB transportation paths for productivity improvement
Modular Conveyors
■ An optimal conv...
|
Pick & Place |
Automatic NG OK Vertical Buffer BN-L-TN
Features
▶User friendly membrane control panel.
▶Use wear-resistant anti-static belts for transmission (convenient belt replacement)
▶Three operation modes:FIFO.LIFO.Pass-through.
▶Parallel and smooth width adj...
|
Board Handling - Conveyors |
Automatic Glue Dispenser DMD221
Features
▶Humanized design, hand-held teaching box operation, convenient programming, easy to learn.
▶It has the functions of drawing points, lines, surfaces, arcs and various irregular curves continuously and uninterrupted, and...
|
Dispensing |
Automatic Glue Dispenser DMDJ331
Features
▶Humanized design, Chinese hand-held teaching box operation, convenient programming, easy to learn;
▶ It has the functions of drawing points, lines, surfaces, arcs and various irregular curves continuously and uninterr...
|
Dispensing |
QYSMT MOREL
Automatic SMT Splicing Machine BMM08EC
What a SMT splicing machine do?
The purpose of the automatic material splicing machine machine is to improve the accuracy and efficiency of component reel splicing, and it al...
|
Tape and Reel Equipment |
QYSMT MOREL
Fully automatic nozzle cleaning machine-XMN-24
During the SMT process, the nozzle is easy to stick to solder paste or dirt, etc. If it is not maintained for a long time or the cleaning is not thorough during maintenance, the solder pa...
|
Cleaning Equipment |
Fully Automatic SMT Stencil Cleaning System BMP-700S
Feature
▶The cleaning tank, the original tank, and the spray tank are designed with liquid level sensor overflow alarm.
▶The opening of the front door is designed with photoelectric sensor p...
|
Cleaning Equipment |
QYSMT / MOREL
Automatick Ultrasonic Stencil Cleaner BMP-1200
Features:
▶All stainless steel body: beautiful, wear resistance, corrosion resistance, acid, alkaline and other cleaning fluid. Meet environmental pr...
|
Cleaning Equipment |
Automatic SMT Stencil Cleaning Machine BMP-1000X
Feature
▶The cleaning tank, the original tank, and the spray tank are designed with a liquid level sensor overflow alarm.
▶The opening of the front door is designed with photoelectric sensor pro...
|
Cleaning Equipment |
YAMAHA YG100R Z Motor 90K2U-0HC208 -9498 396 00834-P50B02002DXSM4(4)...
|
Assembly Services |
ML-A410 SMT Automated Optical Inspection Machine
Feature
▶Economical and practical AOI.
▶High precision detection platform design.
▶Fast programming debugging integration.
▶Automatic recognize the Tip and Bottom side.
▶Professiona...
|
Inspection |
ML-XC2000
Application Advantages
X-RAY COUNTING SYSTEM
We always pay close attention to the global SMT electronic assembly industry, quickly collect the new components, update and process the new
component reel required by customers every week, obtain images from the clo...
|
Component Counters / SMD Counters |
Smart Electronic Shelves
Fixed electronic shelf instructions
※ Multi-color LED (set according to the actual needs of customers), support multiple sets of work orders at the same time to prepare materials for delivery
※ double-sided access material
※...
|
SMD Reel Storage |
MLX6600 X-Ray Solution Microfocus X-Ray Inspection System Machine
X-Ray Solution MLX6600 Hardware technical parameters
H<...
|
Inspection |
PCB Surface Cleaning Machine MLPCM-450
Technical Parameters
1. Independent innovation patent design (patent: 2017SR471774), the industry's first, lets you have the most advanced contact cleaning system in the industry.
2. Using Panasonic PLC programmable...
|
Cleaning Equipment |
L typle Magazine Loader ULF-L-TN
Description
This equipment is used for automatic loading or unloading of PCB Board in SMT Production line.
No.of Mzgazine Upper Conveyor:1 magazine ...
|
Board Handling - Conveyors |
Compact PCB loader LT-L-BN
Description
This equipment is used for automatic loading or unloading of PCB Board in SMT Production line.
No.of Mzgazine Upper Conveyor:1 magazi...
|
Board Handling - Conveyors |
Voltage: 220V AC 60HZ/50HZ
Measure : L415*W250*H180 (Unit: MM)
Wt: 24KG
Efficiency : 60000pcs/H
Features:
*It is used to cut jumper leads of the unilateral taped redial components.(roll-/box-packaged)
*It has small volume and is easy to operate....
|
Lead Forming |
Voltage: 220V AC 60HZ/50HZ
Measure : L440*W430*H190 (Unit: MM)
Wt: 45KG
Efficiency : 4000~40000pcs/H
Feature:
*This machine is used for lead-cutting and forming of tapes, bulk resistors, diodes, and other axial components.
*It finishes leading-cutti...
|
Lead Forming |
Description:
LOOSE RADEAL CUTTING MACHINE
Voltage: 220V AC 60HZ/50HZ
Wt: 30KG
Efficiency: 60~100pcs/Min
Features:
*Used to cut jumper leads of bulk/tube-packaged radial components.
*Adopting the surface vibrating feeding mode, this product i...
|
Lead Forming |
CY-206 knife type splitting machine adopts straight knife design under the upper round knife.
When the cutting board is cut, the v-cut is placed on the lower straight knife, the circuit board does not move, the upper circular knife moves the cutting board, and the stress is relatively sma...
|
Board Handling - Pallets, Carriers, Fixtures |
ML-860 Two-axis plate splitter
1; Appearance size: (L)1100X(W)800X(H)1500
2; Tool size: round knife 125X30X3, 80X35X3. Straight knife
356X43.5X6
3; Tool material: imported high-speed steel
4; board size: L350XW300
5; Drive motor: Servo motor
6; Sp...
|
Depaneling |
Auto Round Blade V-cut PCB Routing Machine ML-505
Feature:
PLC accurately controls the automatic sub-board, and the docking machine can realize unattended full-automatic sub-board operation.
Automatic and accurate feeding plate saves the trouble o...
|
Depaneling |
Guillotine type Automatic V Cut PCB Cutting Machine ML-620
Features
●Suitable for horizontal and vertical design of PCB with
pre- -scored,and suitable for PCBA with sensitive SMD or capa...
|
Depaneling |
Features
●Suitable for high hardness aluminum, copper LED strip PCB. Two PCBAS can be separated at a time (ML-360B).
●Applicable PCB material:Aluminum,Copper,etc.
●Manually feding ...
|
Board Handling - Pallets, Carriers, Fixtures |
SMT Automatic Vacuum Loader LV-330W-TN
This equipment is used for automatic loading operation or bare board...
|
Board Handling - Pallets, Carriers, Fixtures |
SMT Automatic splicing tape machine 08EA
This equipment is SMT(8mm paper tape + emboss tape)Splicing Machine,which is specifically developed for the SMT automatic production line, with non-stop rapid refueling. For the head and tail of the two rolls of the same size, to realize autom...
|
Industrial Automation |
ML-1200 Two-table off-line PCB Router
Features
●High speed CCD visual alignment device.
●Using order mode to realize automatic cutting.Cutting procedure is combined with production&...
|
Depaneling |
ML-550 Automatic Blade Moving PCB Separator
Features
●Suitable for horizontal designed PCB with V-scored groove.
●Automatic feeding and precise positioning to separate P...
|
Depaneling |
Two-axis PCB Separator ML-850
Features。
● Suitable for verically designed PCB with V-scored groove.
● 49 sets of PCB data can be stored.
● PCB material:FR4.Aluminum,Copper.etc.
● Dust c...
|
Depaneling |
NG OK unloader is applied to PCB sorting and packing after SPI and AOI
Features:
Using Panasonic PLC, motor, precision ball screw
Realizing sorting and&...
|
Board Handling - Storage |
Using Lei Sai step control system, precision screw, stable and reliable performance.
SMT line body with less NG board can be realized.
Can be adjusted according to the height of the specific front and back position machine.
It is used for AOI or SPI back-...
|
Board Handling - Conveyors |
1. Intelligent voice automatically reports the number and language reminder, adjustable volume
1--16.
2. The disk material without human intervention, expected tail automatically shut down, without
having to press the stop button, automatic material take complete stop with...
|
Component Counters / SMD Counters |
Product Name:Yamaha feeder calibration Jig
Product Model :
Product Specifications:
Application: Used for adjust various brand of SMT machine feeders
Power: 220V
Condensed Air requirement: 5kg/cm2
Outsize: L500mm*W350mm*H550mm
Weight: 35k...
|
Test Equipment |
QXJ-NC32 SMT pick and place nozzle cleaning machine
In the field of the semiconductor industry today, with the development of SMT, small parts into small, high-density mounting and base for reality, and future development trends will be further component miniaturization. Since th...
|
Cleaning Equipment |
YAMAHA YG100R Z Motor 90K2U-0HC208 -9498 396 00834-P50B02002DXSM4(4)...
|
Assembly Services |
ML-100 Manual PCB Separator(Hand Push Type)
The ML-100 is suitable for a small number of PCB boards to be separated and does not require electricity or air pressure.
The PCB is manually fed between the blades to separate, which is very simple and fast and does not damag...
|
Depaneling |
PCB Depaneling Router ML-CS818
This device is suitable for various small multi-connected PCB sub-boards such as mobile phones, tablet computers, automotive electronics, GPS, boards, etc.
The enlarged size is suitable for the sub-board processing of large circui...
|
Depaneling |
Broader scope, the latest ultra-small SMD components (01005) count, the series is as follows:
These are the components package specifications.
Functions:
1, Empty chip detection capabilities SMD chip counter, the job...
|
Component Counters / SMD Counters |
Label Feeder XCXLF-500
Label Feeder means feeder.First label paper installed in feeder, The feeder provides label for chip mounter.
Electronic operation,Seamless communication with pick and place machine ,Real-time control,communication with Panasonic equipment d...
|
Industrial Automation |
Panasonic Capacitor Feeder
Loading the vertical electronic components in feeder, feeder supply components for pick and place machine to plug-ins.
Electronic operation,Seamless communication with pick and place machine ,Real-time control,communication with JUKI...
|
Other |
Hand-Held Reel Rolling machine
can collection and discharge automatically replace the manual, it's convenient, fast, and improve the working efficiency....
|
Tape and Reel Equipment |