Vacuum Pick up Tool

Subscribe to Thread

Can anyone give a good manufacturer of hand held vacuum pick... - Sep 24, 2003 by Sr. Tech

Try these out www.egismos.com/newproducts.htm ... - Sep 24, 2003 by

Try: * Excelta Roto-Pic� 2000A [www.excelta.com] * Porta-W... - Sep 24, 2003 by davef

Pete: That ACL Staticide� is used on the bulb of the Arach ... - Sep 25, 2003 by davef

Dave, Don't know, just found it on the web. Most suppliers ... - Sep 25, 2003 by PeteC

You can have Hakko vacuum pen it has motor for vacuum genera... - Oct 03, 2003 by Kanwaljit Singh

Hi Haverhill DavidF, SMTA, SMTnet, I should know this, si... - Oct 09, 2003 by

Sr. Tech

#25821

Vacuum Pick up Tool | 24 September, 2003

Can anyone give a good manufacturer of hand held vacuum pick up tools? I have tried most of the common ones out there.(Vampire,Pen Vac,Selecta)They seem to work OK, but they still lose vacuum and drop parts after a couple seconds. We just got in a new part that is a QFP304.It has a big heat sink in the middle of the component body and it is very heavy. We have already had a couple drop off hand vac. tools while transferring them from matrix tray to matrix tray. These components are very pricey and I cannot afford to be dropping them.

Thanks

reply »

Pete C

#25822

Vacuum Pick up Tool | 24 September, 2003

Try these out

www.egismos.com/newproducts.htm

reply »

davef

#25824

Vacuum Pick up Tool | 24 September, 2003

Try: * Excelta Roto-Pic� 2000A [www.excelta.com] * Porta-Wand or Vac-Pac [www.virtual-ii.com] * PELCO� Vacuum Pick-Up System [www.tedpella.com]

reply »

davef

#25828

Vacuum Pick up Tool | 25 September, 2003

Pete: That ACL Staticide� is used on the bulb of the Arach Technology & Application Corp Vacuum Pen� to attain ESD proprties, make us uneasy. "Staticide" is a topical anti-static solution. It's a soap that absorbs moisture from the air to improve the ESD properties of a surface. It needs to be reapplied periodically to maintain it's ESD dissipative properties. On a wear surface, like the bulb, it must take a high level of attention to monitor and maintain the ESD properties of the device.

Beyond that, given all the different non-ESD protected materials of this tool, what level of charging occurs when the air is drawn-in and expelled when handling devices?

reply »

PeteC

#25830

Vacuum Pick up Tool | 25 September, 2003

Dave, Don't know, just found it on the web. Most suppliers will send one for trial.

reply »

Kanwaljit Singh

#25930

Vacuum Pick up Tool | 3 October, 2003

You can have Hakko vacuum pen it has motor for vacuum generation in the pen only which results in having more sucking power.

Regards K J Singh

reply »