Temperature sensitive part

Subscribe to Thread

I have a 10k thermistor to solder to a board, the problem is... - Dec 13, 2001 by smtspecialist

This appears to be a good application for conductive adhesiv... - Dec 13, 2001 by Stefan Witte

Contact the fabricator of this part for their recommendation... - Dec 13, 2001 by davef

smtspecialist

#18436

Temperature sensitive part | 13 December, 2001

I have a 10k thermistor to solder to a board, the problem is that the thermistor can't absorbe more then 105 degree C and as soon as I send it through the reflow oven or hand solder it, the part internaly over heat giving inconsistent readings.

Any clue, anyone?

reply »

Stefan Witte

#18437

Temperature sensitive part | 13 December, 2001

This appears to be a good application for conductive adhesive. If the part is through hole, you could wire wrap the leads around two posts.

reply »

davef

#18440

Temperature sensitive part | 13 December, 2001

Contact the fabricator of this part for their recommendations. There is about as many different approaches to soldering thermistors as there is thermistors.

You imply that this is a SMT style package. If that is correct, it's curious that the component cannot stand soldering temperatures. Are you confusing "operating temperature" with "processing temperature"? Although you do say that the component is damaged with soldering temperature. Is that damage permanent?

reply »