Hi Danial,
Yes, you can use one cleaning chemistry for all paste types. There are many available chemistries from many manufacturers. The chemistries that I would recommend include:
StencilWash Plus from Aqueous Technologies http://www.aqueoustech.com
440R from SmartSonic http://www.smartsonic.com (They only sell chemicals to their equipment owners)
5005 from Kyzen http://www.kyzen.com
Hydrex WS from Petroferm http://www.petroferm.com
SC200 from Zestron http://www.zestron.com
Although the chemicals listed above are capable of removing all paste types, they may not all be compatible with your cleaning system. Some of the chemicals are designed for ultrasonic applications while others are suitable for both ultrasonic and spray-in-air technologies. As for chemical life, some chemicals have a relatively low loading capacity and must be changed out every week or two. That may present an environmental issue. Some chemicals on this list have very high loading capacities. A chemical with a high loading capacity, depending on the cleaning equipment, may never need to be changed. If your cleaning system is equipped with a filtration system that will remove solids from the wash solution, then the periodic addition of chemistry to make up for chemical dragout and normal evaporation will create a chemical attrition rate that will prevent the need to �throw out� spent chemicals.
Loading of chemicals are not usually determined by specific gravity, titration, or pH tests. These tests indicate the concentration factors of the chemical. They are helpful in determining if the chemical is at the correct concentration.
Mike Konrad Aqueous Technologies 909.944.7771
reply »