juki smt machine 2060 error E613091 the vacuum of a head did not go up. L-3 head

Subscribe to Thread

I have an old Juki 2060 The electors were replaced on some h... - Oct 13, 2023 by CrystalW

Possibly blocked air lines did you check air pressure? Also ... - Oct 24, 2023 by sarason

CrystalW

#90076

juki smt machine 2060 error E613091 the vacuum of a head did not go up. L-3 head | 13 October, 2023

I have an old Juki 2060 The electors were replaced on some heads that were disabled. Now we are showing some of the same errors with those heads. Does anyone have any suggestions for possible cause that would make this happen again. Another warning is about vacuum pressure being low on that same L-3 head.

reply »

sarason

#90124

juki smt machine 2060 error E613091 the vacuum of a head did not go up. L-3 head | 24 October, 2023

Possibly blocked air lines did you check air pressure? Also drivers on the relevant boards. or simply damage in the flexible wiring harness( a nightmare)

sarason

reply »