Silver conductive glue in syringe - mixing

Subscribe to Thread

Hello, I have litle bit simply question. I have silver condu... - Sep 10, 2023 by mekmat

See attached snippet from a datasheet: Syringe 1. Twist and... - Sep 11, 2023 by MagyarT

Thanks for the info.. ... - Sep 12, 2023 by BryanGomez

mekmat

#89963

Silver conductive glue in syringe - mixing | 10 September, 2023

Hello, I have litle bit simply question. I have silver conductive glue in small syringe. Can you help my how should I mix this glue in syringe before using? Thank you. M.

reply »

MagyarT

#89965

Silver conductive glue in syringe - mixing | 11 September, 2023

See attached snippet from a datasheet:

Syringe 1. Twist and remove the cap from the syringe. Do not discard cap. 2. Measure 1 part by volume of A. 3. Measure 1 part by volume of B. 4. Dispense material on a mixing surface or container, and thoroughly mix parts A and B together. 5. To stop the flow, pull back on the plunger. 6. Clean nozzle to prevent contamination and material buildup. 7. Replace the cap on the syringe.

Can or Jar 1. Stir each part individually to re-incorporate material that may have separated. 2. Measure 1.1 part by weight of A. 3. Measure 1 part by weight of B. 4. Thoroughly mix parts A and B together. 5. Apply adhesive to the application area.

reply »

BryanGomez

#89970

Silver conductive glue in syringe - mixing | 12 September, 2023

Thanks for the info..

reply »