Panasert MV 2F Problem ZL or ZR Axis DRIVER ALARM

Subscribe to Thread

Hi The machine run fine. Now I had the problem ZL or ZR driv... - Aug 19, 2023 by Sony

It's been some time since I used these machines. Are the se... - Sep 08, 2023 by Carl_P

Sony

#89896

Panasert MV 2F Problem ZL or ZR Axis DRIVER ALARM | 19 August, 2023

Hi The machine run fine. Now I had the problem ZL or ZR driver Alarm. Turn on machine, everything is checked O.K I can be able to home the machine. When just start auto, the assembly or semi -auto. The machine is stopped, and show driver alarm ZL or ZR. Tried to lubricate rail and ball screw, checked all sensors and no luck. I even removed all feeders, but it still the same problem.

Please help, error code is NC0303. Also, in the Z axis P325C-11LED driver box, the RED LED lit up on OC (over current)

Thank you Sony Nguyen

reply »

Carl_P

#89960

Panasert MV 2F Problem ZL or ZR Axis DRIVER ALARM | 8 September, 2023

It's been some time since I used these machines.

Are the sensors/arms ok at the top of the turret, their like arms that can move 90deg out....

reply »