FUJI IP3 MTU problems - property data not sent to MTU, program NG

Subscribe to Thread

Hello all ! FUJI IP3 starts up, makes zero setting OK But i... - Jun 20, 2023 by madisreivik

The MTU has it's own proper data file. You need to send tha... - Jun 20, 2023 by jdengler

Thanks ! I totally forgot that MTU had its own prop file, up... - Jun 21, 2023 by madisreivik

To resolve this issue, you need to ensure that the proper da... - Jun 23, 2023 by meher

All is OK now. The machine was offline couple months and pro... - Jun 24, 2023 by madisreivik

madisreivik

#89609

FUJI IP3 MTU problems - property data not sent to MTU, program NG | 20 June, 2023

Hello all !

FUJI IP3 starts up, makes zero setting OK But if I start AUTO mode, it gives error -------------------------------------------------------------------------------- Code 11082010 UsedBy MTU3,MTU4,MTU5 Display Usable Proper Data has not been sent to MTU Cause Proper data is not stored in the MTU. Remedy Transmit Proper data to the MTU.

Machines communicates with MTU during startup but does not send property data. Why ? Also the menu on MTU started to speak japanese only :(

Please help.

reply »

jdengler

#89610

FUJI IP3 MTU problems - property data not sent to MTU, program NG | 20 June, 2023

The MTU has it's own proper data file. You need to send that to the MTU.

reply »

madisreivik

#89612

FUJI IP3 MTU problems - property data not sent to MTU, program NG | 21 June, 2023

Thanks ! I totally forgot that MTU had its own prop file, uploaded it from Flexa and now works fine.

reply »

meher

#89622

FUJI IP3 MTU problems - property data not sent to MTU, program NG | 23 June, 2023

To resolve this issue, you need to ensure that the proper data is stored and transmitted to the MTU. Double-check the communication settings between the machine and the MTU during the startup process. Make sure that all the necessary data is being sent and received correctly. https://australiacasinoonline.com/best-payout-online-casinos/

As for the menu displaying Japanese only, it's possible that the language settings have been inadvertently changed. Try accessing the menu settings and look for an option to switch the language back to your preferred language.

reply »

madisreivik

#89625

FUJI IP3 MTU problems - property data not sent to MTU, program NG | 24 June, 2023

All is OK now. The machine was offline couple months and probably some memory battery is dead. All problems were solved after uploading prop data to IP and MTU.

reply »