Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
JaNets - question about smt files for machines

JaNets - question about smt files for machines

Subscribe to Thread

Views: 7156

Hello, When I build an smt program for the line, I'm getti... - Feb 09, 2023 by Kirillka

What is the machine brand and model? ... - Feb 09, 2023 by Pratyeka

Hello Pratyeka its two machines, Juki RS-1R ... - Feb 12, 2023 by Kirillka

PCBSynergy supports the Juki RS-1R, it can be found here ht... - Feb 24, 2023 by sarason

Thanks but im not looking for a new program.... ... - Feb 26, 2023 by Kirillka

It depends on how you plan on loading the programs the next ... - Feb 27, 2023 by dontfeedphils

I used to work on Siemens ASM machines, with server that had... - Feb 28, 2023 by Kirillka

Juki should have a system like that. Pretty sure it's a par... - Feb 28, 2023 by dontfeedphils

Well, I checked everything, also spoke with chinese guys, th... - Mar 01, 2023 by Kirillka

Then you must be missing a piece of the software suite becau... - Mar 01, 2023 by dontfeedphils

what are the chances that you remember the name of the prog... - Mar 05, 2023 by Kirillka

I actually still have all my docs and software from that tim... - Mar 05, 2023 by dontfeedphils

What you're using is IS - Intelligent solutions... What I ha... - Mar 05, 2023 by Kirillka

Interesting. Forgive me if this is a stupid question, but i... - Mar 05, 2023 by dontfeedphils

I wrote today an email to juki at germany, hope they'll be a... - Mar 05, 2023 by Kirillka

Hope you can get in touch with the right people. I used to ... - Mar 05, 2023 by dontfeedphils

No answer so far, I just hope they are silent because they h... - Mar 07, 2023 by Kirillka

Have you tried calling? What area of the world are you in? ... - Mar 07, 2023 by dontfeedphils

I am from Israel. We have some chinese guys in our second fa... - Mar 07, 2023 by Kirillka

JaNets - question about smt files for machines | 9 February, 2023

Hello,

When I build an smt program for the line, I'm getting .iss as a main program, which is divided into .i01 and .i02 to load up in the machines, and on the machine itself,it asks to re-save it as a machine format, in my case its .s01x (for both machines,same ending - I have two RS-1R machines in line).

What I'm getting is 3 different ending for the same program - .iss, .i01/.i02 and .s01x , right ? Which files to I need to keep to re-run the smt assembly program later? While it splits to .i01 and .i02 - can I rename it straight to .s01x ?

It sounds different in my head. Cant really write it, but I hope you guys get the point.

JaNets - question about smt files for machines | 9 February, 2023

What is the machine brand and model?

JaNets - question about smt files for machines | 12 February, 2023

Hello Pratyeka its two machines, Juki RS-1R

JaNets - question about smt files for machines | 24 February, 2023

PCBSynergy supports the Juki RS-1R, it can be found here

https://pcbsynergy.com

sarason

JaNets - question about smt files for machines | 26 February, 2023

Thanks but im not looking for a new program....

JaNets - question about smt files for machines | 27 February, 2023

It depends on how you plan on loading the programs the next time. I used to always send the programs to the machines from the main IS program, but if you just want to load programs from the machine (assuming your programs don't require updates) then you could just save them directly on the machines and load from there.

JaNets - question about smt files for machines | 28 February, 2023

I used to work on Siemens ASM machines, with server that had a program called Siplace Pro, which was connected to lines, and from line computer they could load the program to the machines in the line, and I could do updates "online" if needed, before the operator whos loading the program to the macines on the line. I though Juki had a similar system, but so far, we used usb sticks to transfer the programs, and lately, we made a "shared folder" from both machines to my server, so when I create a program,I save it on the machines right away. Too bad that Juki does not have a similar system that Siemens got...

JaNets - question about smt files for machines | 28 February, 2023

Juki should have a system like that. Pretty sure it's a part of the IS suite of software, but it's been 6+ years since I've dealt with Juki.

JaNets - question about smt files for machines | 1 March, 2023

Well, I checked everything, also spoke with chinese guys, they just make a 1 side program, move it to the machine by usb or on the network, and just run it. They are light years away from Siemens Siplace Pro.

JaNets - question about smt files for machines | 1 March, 2023

Then you must be missing a piece of the software suite because I was able to keep and maintain "master" programs on the IS server and then create "job" programs each time they ran a job and those were sent to the machines from a central line control PC.

JaNets - question about smt files for machines | 5 March, 2023

what are the chances that you remember the name of the program?

JaNets - question about smt files for machines | 5 March, 2023

I actually still have all my docs and software from that time. Just dug through some manuals and found one for "IS - Intelli PD" (program download).

Couldn't tell you if this is still what it's called, but this is what we used to send programs to the line.

Attachments:

IS - Intelligent PD.jpg

JaNets - question about smt files for machines | 5 March, 2023

What you're using is IS - Intelligent solutions... What I have is - JaNets I also have it in my program, but its not working.

Attachments:

ffs.png

JaNets - question about smt files for machines | 5 March, 2023

Interesting.

Forgive me if this is a stupid question, but isn't that the answer to your question? You have the program to do what you want, it just doesn't work? Have you contacted Juki to work through the issue?

Seems like an easy fix.

JaNets - question about smt files for machines | 5 March, 2023

I wrote today an email to juki at germany, hope they'll be able to guide me trough. Chinese guys arent much of a help at all....

JaNets - question about smt files for machines | 5 March, 2023

Hope you can get in touch with the right people. I used to deal with the people in the US and they were always helpful and quick to reply.

JaNets - question about smt files for machines | 7 March, 2023

No answer so far, I just hope they are silent because they have alots of emails, and not because its not doable with juki system like on siemens...

JaNets - question about smt files for machines | 7 March, 2023

Have you tried calling? What area of the world are you in? Why not call tech support for your geographical area?

JaNets - question about smt files for machines | 7 March, 2023

I am from Israel. We have some chinese guys in our second facility in china, who is working slower than us with a decade old methods (transfering files over usb to the machines from an offline computer). And the only support that we have here is only for a technician for mechanical issues, which I didnt had at all for past year or so.

SMTnet
»
Electronics Forum
»
JaNets - question about smt files for machines

World's Best Reflow Oven Customizable for Unique Applications

Wave Soldering 101 Training Course

TIM & Thermal Gap Filler Dispensing - Download our new guide for process considerations and popular configurations.

© 1995-2024 SMTnet

ipc certification

Now Online

83
Visitors

1
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

The marketing tools you need -- SMTNet

Jetting Pump for Integration

Fixate labor costs with selective soldering solutions