R&D Technical Services RD1 Heater gasket

Subscribe to Thread

Our RD-1 vapor phase is in need of new heater gaskets. Does... - Dec 14, 2022 by MarkA

In the automotive industry there has been a swing away from ... - Dec 16, 2022 by sarason

To add to that we once had to replace the gaskets in a very ... - Dec 19, 2022 by Stephen

IBL Technologies acquired them in 2013. The technical contac... - Dec 20, 2022 by CAPSE

MarkA

#88728

R&D Technical Services RD1 Vapor Phase Heater Gasket | 14 December, 2022

Our RD-1 vapor phase is in need of new heater gaskets. Does anyone where these can be procured or what the material is?

reply »

sarason

#88737

R&D Technical Services RD1 Vapor Phase Heater Gasket | 16 December, 2022

In the automotive industry there has been a swing away from gaskets and a movement to high temp resistant sealing compounds. In all probability your original gasket would have been viton for high temp O-rings. So if that is the case the replacement are fairly easily located at Bearing/Industrial suppliers. If a flat gasket then use again a high temp sealent again from Bearing/Industrial suppliers or Automotive suppliers.

sarason

reply »

Stephen

#88745

R&D Technical Services RD1 Vapor Phase Heater Gasket | 19 December, 2022

To add to that we once had to replace the gaskets in a very old oven. We couldn't find any so we used a high temperature sealant. And then realized that they weren't gaskets originally, it was originally sealed with high temperature sealant. After it cured it looked like a gasket but the give away on the old ones was that some had a bit of flash material.

reply »

CAPSE

#88746

R&D Technical Services RD1 Vapor Phase Heater Gasket | 20 December, 2022

IBL Technologies acquired them in 2013. The technical contact is service.us@ibl-tech.com

reply »