Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


SMT Inductor

Views: 642

#85672

SMT Inductor | 23 September, 2020

Hello Everyone please help me identify the Inductor with specification as Inductor 26mh 0805. This is a very critical Inductor for my project, however, this small Inductor couldn't be found.

reply »

#85673

SMT Inductor | 23 September, 2020

You'll be searching for a while... There's no way you can have that large of inductance in an 0805 package. You'd be hard-pressed to even have a 1mH in an 0805.

reply »

#85731

SMT Inductor | 6 October, 2020

Plenty of 0805 inductors around, up to 470mH, but nothing that is 26mH. Coilcraft do 23.5mH or 29mH - see https://www.coilcraft.com/getmedia/18dd250a-2b92-4f9a-bcee-3624995acc0f/0302cs.pdf

Eaton do a 27mH 0805 - see https://www.eaton.com/content/dam/eaton/products/electronic-components/resources/data-sheet/eaton-mcl2012v2-multilayer-chip-inductor-data-sheet.pdf

Vishay also have a 27mH item - see https://www.vishay.com/docs/34115/imc08051.pdf

You could also try Wurth Elektronik, TDK, or Murata.

reply »

#85732

SMT Inductor | 6 October, 2020

> Plenty of 0805 inductors around, up to 470mH, but
> nothing that is 26mH. Coilcraft do 23.5mH or 29mH
> - see
> https://www.coilcraft.com/getmedia/18dd250a-2b92-4
> f9a-bcee-3624995acc0f/0302cs.pdf

Eaton do a 27mH
> 0805 - see
> https://www.eaton.com/content/dam/eaton/products/e
> lectronic-components/resources/data-sheet/eaton-mc
> l2012v2-multilayer-chip-inductor-data-sheet.pdf

V
> ishay also have a 27mH item -
> see https://www.vishay.com/docs/34115/imc08051.pdf
> You could also try Wurth Elektronik, TDK, or
> Murata.

Double-check your units! The datasheet's you all linked are in nH, not mH. There's a massive difference. What he's asking for isn't possible in a 0805.

reply »

#85733

SMT Inductor | 6 October, 2020

Ooops! Indeed they are! My apologies!

reply »

#85739

SMT Inductor | 6 October, 2020

I was about to suggest going to a smaller inductor and using traces to make up the difference. But I don't think that will work with mH.

reply »

ICT Total SMT line Provider

Jade Series Selective Soldering Machines