MPM Momentum Screen Printer Paste Inspection problem

Subscribe to Thread

I am having an issue with aligning vision for solder paste i... - Mar 27, 2019 by Doug DV

I am having the same problem with the MPM Accela solder past... - May 13, 2019 by Doug DV

Doug DV

#82229

MPM Momentum Screen Printer Paste Inspection problem | 27 March, 2019

I am having an issue with aligning vision for solder paste inspection with the PCB in the Momentum machine. The SMT operators setup the profile on the machine, which I then import into Aegis CircuitCAM to add PCB locations. But when I export again, the fiducials are not in the same place, and the vision program does not work. I cannot figure out how to align the data I exported with the pcb in the machine.

If you can help with that problem, please let me know.

reply »

Doug DV

#82559

MPM Momentum Screen Printer Paste Inspection problem | 13 May, 2019

I am having the same problem with the MPM Accela solder paste printer machine.

If the fiducials are adjusted for PCB alignment, the location of the paste is then wrong, and vision inspection fails. This is a problem for both pad preview inspection and paste inspection. I have no idea how to re-align the paste data to match the fiducials. Any help here?

reply »